Add Selected to Cart

ALL MECHANICAL STANDARDS

ICS General Code Edition Title / Description
  NIS ISO 3894 2018 Road vehicles - Wheels/Rims for Commercial Vehicles - Test Methods
  NIS ISO 3833 2018 Road Vehicles - Types - Terms And Definitions
  NIS ISO 3468 2018 Passenger cars - windscreen and demisting systems - testing method
  NIS ISO 3537 2018 Road Vehicles - Safety Glazing materials - Mechanical Test
  NIS ISO 2107 2018 Aluminium and aluminium alloys - Wrought products - Temper designations
  NIS ISO 1585 2018 Road vehicles - Engine test code - Net power
  NIS ISO 15037-1 2018 Road Vehicles - Dynamic Test Method : Part 1 - General Conditions for Passenger Cars
  NIS ISO 15037-2 2018 Road Vehicles - Dynamic Test Method : Part 2 - General Conditions for Heavy Vehicles and Buses
  NIS 1031 2018 Standard for Tobacco and Tobacco Products- Smokeless Tobacco Products Mechanical Standards
  NIS 463 2018 Standard for Tobacco and Tobacco Products- Specification for Cigarette
  NIS 127 2018 Road Vehicle: Requirements for Passenger Cars
  NIS ISO 4030 2018 Road Vehicles-Vehicle Identification Number (VIN)-Location And Attachment
  NIS ISO 7117 2018 Motorcycles - Measurement method for determining maximum speed
  NIS ISO 7438 2018 Metallic materials - bend test
  NIS 889 2018 Safety and Performance requirements for motorcycle assembly
  NCP 057 2018 Code of practice for Large, Medium and small motorcycle Assembly Plant
  NIS 983 2018 Standard for Ignition Coil
  NIS 984 2018 Standard for spark plug
  NIS 985 2018 Standard for Ignition magneto
  NIS 986 2018 Standard for Ignition Distributor
  NIS 987 2018 Aluminium and aluminium alloys circle and circle stock for the production of culinary utensils
  NIS 988 2018 Standard for Uncoated Aluminium Hollow-ware Cooking Utensils
  NIS 1000 2018 Standard for Clean Cook Stove- Biomass Type
  NIS 1014 2018 Specification for Zinc-Aluminum-Magnesium (Zn-Al-Mg) Alloy Coated Steel Sheet for General Applications
  NIS 1015 2018 Specification for Carpentry Saws(Part1:Ripping and Cross Cut Saws)
  NIS 1016 2018 Specification for Carpentry Saws(Part2: Tenon and Dovetail Saws)
  NIS ISO 10190 2018 Motorcycles Chains - Characteristics and Test Methods
  NIS ISO 11460 2018 Two wheeled motorcycles - positioning of lighting and light - ignaling devices
  NIS ISO 11486 2018 Motorcycles - Methods for setting running resistance on a chassis dynamometer
  NIS ISO 11530 2018 Road vehicles - Hydraulic jacks - Specifications
  NIS ISO 12103-1 2018 Road vehicles - Test contaminants for filter evaluation
  NIS ISO 13232-1 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 1: Definitions, symbols and general considerations, NIS ISO 13232-1:(2014) 2018
  NIS ISO 13232-2 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles
  NIS ISO 13232-3 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Part 3: Motorcyclist anthropometric impact dummy
  NIS ISO 13232-4 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 4: Variables to be measured, instrumentation and measurement procedures
  NIS ISO 13232-5 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 5: Injury indices and risk/benefit analysis
  NIS ISO 13232-6 2018 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to Motorcycles Part 6: Full-scale impact-test procedures
  NIS ISO 13232-7 2018 Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
  NIS ISO 13232-8 2018 Motorcycles-Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 8: Documentation and reports
  NIS ISO 14513 2018 Road vehicles - Pedestrian protection - Head impact test method
  NIS ISO 1463 2018 Metallic and Oxide Coating - Measurement of coating thickness-Microscopical method
  NIS ISO 148-1 2018 Metallic Materials?Charpy pendulum impact tests Part 1: Test Method.
  NIS ISO 148-2 2018 Metallic Materials?Charpy pendulum impact test Part 2: Verification of testing machines.
  NIS ISO 148-3 2018 Metallic Materials?Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
  NIS ISO 17615 2018 Aluminium and Aluminum ingot - Alloyed ingot for remelting
  NIS ISO 19364 2018 Passenger cars - Vehicle dynamic simulation and validation? Steady-state circular driving behaviour
  NIS ISO 19365 2018 Passenger cars - Validation of vehicle dynamic simulation - Sine with dwell stability control testing
  NIS ISO 20081 2018 Zinc and Zinc Alloys - Method of samplings - Specifications
  NIS ISO 204 2018 Metallic materials- Uniaxial Creep testing in tension-Method of test
  NIS ISO 209 2018 Aluminium and Aluminium Alloys- Chemical Composition
  NIS ISO 2177 2018 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution
  NIS ISO 2395 2018 Test sieves and test sieving – Vocabulary
  NIS ISO 2591-1 2018 Test Sieving - Part 1: Methods of using test sieves of woven wire cloth and perforated metal plate
  NIS ISO 286-1 2018 Geometrical product specifications (GPS)?ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits.
  NIS ISO 286-2 2018 Geometrical product specifications (GPS)?ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
  NIS ISO 301 2018 Zinc Alloy ingots intended for casting
  NIS ISO 3310-1 2018 Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
  NIS ISO 3310-2 2018 2018 Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
  NIS ISO 3310-3 2018 2018 Test sieves - Technical requirements and testing - Part 3: Test sieves of electroformed sheets
  NIS ISO 3497 2018 Metallic coatings - Measurement of coating thickness –X-ray spectrometer methods
  NIS ISO 3522 2018 Aluminum And Aluminum Alloys - Castings - Chemical composition and mechanical properties
  NIS ISO 3543 2018 Metallic and non Metallic coatings - Measurement of coating thickness-Beta backscatter method
  NIS ISO 3779 2018 Road vehicles - Vehicle identification number (VIN) - Content and structure
  NIS ISO 3780 2018 Road Vehicles - World Manufacturer Identifier (WMI) Code
  NIS ISO 3917 2018 Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
  NIS ISO 4107 2018 Commercial vehicles - Wheel hub attachment dimensions,
  NIS ISO 4210-1 2018 Cycles - Safety requirements for Bicycles ?Part 1:Terms and definitions
  NIS ISO 4210-2 2018 Cycles - Safety requirements for bicycles ?Part 2:Requirements for city and trekking, young adult, mountain and racing bicycles
  NIS ISO 4210-3 2018 Cycles - Safety requirements for bicycles - Part 3: Common test methods
  NIS ISO 4210-4 2018 Cycles - Safety requirements for bicycles - Part 4: Braking test methods
  NIS ISO 4210-5 2018 Cycles - Safety requirements for bicycles ?Part 5: Steering test methods
  NIS ISO 4210-6 2018 Cycles - Safety requirements for bicycles - Part 6: Frame and fork test methods
  NIS ISO 4210-7 2018 Cycles - Safety requirements for bicycles - Part 7: Wheels and rims test methods.
  NIS ISO 4210-8 2018 Cycles - Safety requirements for bicycles - Part 8: Pedal and drive system test methods
  NIS ISO 4210-9 2018 Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post- test methods
  NIS ISO 4249-3 2018 Motorcycles Tyres and Rims (Code –Designated Series) Part 3: Rims
  NIS ISO 565 2018 Test sieves- Metal wire cloth, perforated metal plate and electroformed sheet- Nominal sizes of openings
  NIS ISO 5775 2018 Bicycle Tyres and Rims- Part 2: Rims
  NIS ISO 6054-2 2018 Motorcycles Tyres and Rims (Code –Designated Series) - Diameter Code 4 to 12. Part 2: Rims
  NIS ISO 6361-1 2018 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 1: Technical conditions for inspection and delivery
  NIS ISO 6361-2 2018 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties
  NIS ISO 6361-3 2018 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 3: Strips: Tolerances on shape and dimensions
  NIS ISO 6361-4 2018 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 4: Sheets and plates: Tolerances on shape and dimensions
  NIS ISO 6361-5 2018 Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 5: Chemical composition
  NIS ISO 6362?1 2018 Wrought Aluminium and Aluminium alloys - - Extruded Rod/Bars. Tubes and profile - Part 1 - Technical condition for inspection and delivery.
  NIS ISO 6362?2 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extrude rod/bars. Tube and profiles. Part 2- Mechanical properties.
  NIS ISO 6362?3 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extrude rod/bars. Tube and profiles. Part 3- Extruded rectangular bars - Tolerances on shape and dimensions
  NIS ISO 6362?4 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extrude rod/bars. Tube and profiles. Part 4- Profiles - Tolerances on shape and dimensions
  NIS ISO 6362?5 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extruded rod/bars. Tube and profiles. Part 5- Round, square and hexagonal bars - Tolerances on shape and dimensions
  NIS ISO 6362?6 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extrude rod/bars. Tube and profiles. Part 6- Round, square, rectangular and hexagonal tubes - Tolerances on shape and dimensions
  NIS ISO 6362?7 2018 Wrought Aluminium and Aluminium alloy - Alloyed - Extrude rod/bars. Tube and profiles. Part 7- Chemical composition
  NIS ISO 6487 2018 Road vehicles - Measurement techniques in impact tests - Instrumentation
  NIS ISO 6597 2018 Road Vehicles-Hydraulic braking system, including those with electronic control functions, for motor vehicles-Test procedures
  NIS ISO 6692 2018 Cycles - Marking of cycle?s components
  NIS ISO 6695 2018 Cycles - Pedal axles and crank assembly with square end fitting- Assembly dimensions
  NIS ISO 6696 2018 Cycles - Screw thread used in bottom brackets assemblies
  NIS ISO 6697 2018 Cycles - Hubs and Freewheels assembly dimensions
  NIS ISO 6698 2018 Cycles - Screws threads used to assemble freewheels on Bicycle hubs
  NIS ISO 6699 2018 Cycles - Handlebar centre and stem dimensions
  NIS ISO 6892-1 2018 Mettalic Material-Tensile testing- Part 1-Method of test at room temperature
  NIS ISO 6892-2 2018 Metallic Materials ?Tensile Testing of Metal- Part 2- Method of test at elevated temperature
  NIS ISO 6892-3 2018 Metallic Materials ?Tensile Testing of Metal- Part 3- Method of test at room temperature
  NIS ISO 6892-4 2018 Metallic Materials ?Tensile Testing of Metal- Part 4- Method of test at liquid Helium
  NIS ISO 7650 2018 Commercial vehicles and buses - Mounting dimension for starter motors of type 1, 2, 3 and 4,
  NIS ISO 7651 2018 Commercial vehicles and buses - Mounting dimension for starter motors of type 1, 2 and 3
  NIS ISO 7800 2018 Metallic materials - Wire- Simple Torsion Test
  NIS ISO 7801 2018 Metallic Materials?Wire?Reverse bend test.
  NIS ISO 8090 2018 Cycles. Terminology
  NIS ISO 8098 2018 Cycles Safety requirements for bicycles for young children
  NIS ISO 8442 2018 Material and articles in contact with foodstuffs- Cutlery and Table hollowware: Lightly silver - plated table hollowware protected by lacquer
  NIS ISO 8442-1 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Part 1:Requirements for cutlery for the preparation of food
  NIS ISO 8442-2 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Part 2; Requirements for stainless steel and silver-plated cutlery
  NIS ISO 8442-3 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Part 3 Requirements for silver-plated table and decorative hollowware
  NIS ISO 8442-4 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Part 4: Requirements for gold - plated cutlery
  NIS ISO 8442-5 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Materials and articles in contact with foodstuffs - Cutlery and table ignaling - Part 5: Specification for sharpness and edge retention test of cutlery
  NIS ISO 8442-7 2018 Materials and articles in contact with foodstuffs - Cutlery and table ignaling : Requirements for table cutlery made of silver, other precious metals and their alloys
  NIS ISO 8442-8 2018 Material and articles in contact with foodstuffs - Cutlery and Table hollowware: Requirement for silver table and decorative holloware
  NIS ISO 8488 2018 Cycles - Screw threads used to assemble head fittings on bicycle forks
  NIS ISO 8491 2018 Metallic Materials?Tube (in full section)?Bend test.
  NIS ISO 8492 2018 Metallic Materials?Tube?Flattening test.
  NIS ISO 8562 2018 Cycles - Stem wedge angle
  NIS ISO 8705 2018 Mopeds - Measurement method for location of centre of gravity
  NIS ISO 8710 2018 Standard for motorcycle brakes and brake systems, tests and measurement method
  NIS ISO 8854 2018 Road vehicles - Alternators with regulator - Test methods and general requirements
  NIS ISO 9021 2018 Standard for motorcycles controls, types, positions and functions
  NIS ISO 9129 2018 Motorcycle - Measurement methods for moments of inertia
  NIS ISO 9130 2018 Motorcycles - Measurement method for location of centre of gravity
  NIS ISO 9132 2018 Three-wheeled mopeds and motorcycles - masses - vocabulary
  NIS ISO 9565 2018 Standard for two-wheeled motorcycles-parking stability of side and centre stands
  NIS ISO 9633 2018 Cycle chains. Characteristics and test methods
  NIS ISO 9987 2018 Motorcycles - Measurement of Variation of dipped beam inclination as a function of load
  77.150.10 DNIS 838 2015 Aluminum and aluminum alloys – circle stock for production of culinary utensils specifications.
  77.040.01 DNIS 839 2015 Method for tensile testing of metal.
  25.160.040 DNIS 840 2015 Test sieves – metal wire cloth, perforated metal plate and electroformed sheet – normal sizes of opening.
  21.060.10 DNIS 841 2015 Assembly tools for screws and nuts – hexagon socket keys.
  53.020.20 DNIS 842 2015 Chain slings assembled by methods other than welding.
  53.020.20 DNIS 843 2015 Chain slings of welded construction. Grade m(4), s(6) and T(8).
  23.060.30 DNIS 844 2015 Automotive LPG filling system for light and heavy duty vehicles. Nozzles, test requirements and dimensions.
  53.020.30 DNIS 845 2015 Standards on bicycle chains.
  43.040.50 DNIS 846 2015 Standard on hub cog of bicycle.
  97.040.20 DNIS 847 2015 Specification for domestic pressure cooker.
  23.100.19 DNIS 848 2015 Standard for automobiles – electric fuel pumps.
  17.160 DNIS 849 2015 Standard on vibration testing methods for automobiles.
  75.200 DNIS 850 2015 Specification for portable liquefied petroleum gas appliance operating at vapor pressure.
  23.020.20 DNIS 851 2015 Gas cylinder. Non- refillable metallic gas cylinders- specification and test method.
  43.040.40 DNIS 852 2015 Road vehicles – hydraulic braking system including those with electronic control functions for motor vehicles – test procedures.
  55.120 DNIS 853 2015 Specification for round open top sanitary cans for food and drinks part 2. General requirement.
  77.040.01 DNIS 854 2015 Test method for Nick break testing of metals.
  77.140.65 DNIS 855 2015 Standard for mild steel wire.
  77.150.10 DNIS 856 2015 Specification for collapsible aluminum tubes.
  83.140.01 DNIS 857 2015 Specification for plastic seamless tubes.
  77.150.10 DNIS 858 2015 Specification for multilayer aluminum laminate tube.
  23.020.20 DNIS 859 2015 Specification for refillable seamless gas cylinder for storage of LPG.
  23.020.20 DNIS 860 2015 Specification for cylinders for onboard storage of LNG for automotive fuel.
  97.040.30 DNIS 861 2015 Household frost free refrigerating appliances.
  97.040.30 DNIS 862 2015 Household refrigerating appliances.
  13.220.20 DNIS 863 2015 Fire- glossary of terms- fire protection and fire fighting equipment.
  13.220.20 DNIS 864 2015 Portable fire extinguisher- selection and location.
  13.22.20 DNIS 865 2015 Fire test methods for solid insulating materials and non- metallic enclosures used in electric equipment.
  77.140.01 DNIS 866 2015 Method of galvanized coating of iron and steel products.
  25.100.40 DNIS 867 2015 Standard on hacksaw frame.
  25.100.40 DNIS 868 2015 Standard on hacksaw.
  77.060.01 DNIS 869 2015 Standards for hinges for wooden doors and windows.
  97.130.30 DNIS 870 2015 Trolley jack.
  13.220.20 DNIS 871 2015 Specification for portable fire extinguisher – water/ gas contained type.
  13.220.20 DNIS 872 2015 Specification for portable fire extinguisher- water powder type.
  13.220.20 DNIS 873 2015 Specification for portable fire extinguisher- carbon dioxide type.
  13.220.20 DNIS 874 2015 Maintenance of fire protection equipment portable fire extinguisher.
  13.220.20 DNIS 875 2015 Portable fire extinguisher- foam (gas container) type.
  13.220.20 DNIS 876 2015 Portable fire extinguisher – foam (stored pressured) type.
  13.220.20 DNIS 877 2015 Portable fire extinguisher – ( stored pressure) type.
  13.220.20 DNIS 878 2015 Portable fire extinguisher – Halogenated hydrocarbon type.
  13.220.20 DNIS 879 2015 portable fire extinguisher – dry chemical type.
  97.170 DNIS 880 2015 Draft standard for elasticated disposable diaper.
  97.080 DNIS 881 2015 Draft standard for non- woven clearing wet wipes.
  23.020.30 NCP 058 2017 Code of Practice for General Handling and Control of LPG Cylinders
  NIS ISO 17879 2021 Gas Cylinders- Self-Closing cylinder valves-Specifications and type testing
  NIS ISO 17871 2021 Gas Cylinders- Quick release cylinder valves-Specifications and type testing
  NIS ISO 14245 2021 Gas Cylinders- Specifications and testing of LPG cylinder valves- self closing
  NIS ISO 10297 2021 Gas Cylinders- Cylinder Valves-Specification and type testing
  NIS ISO 13341 2021 Gas Cylinders- Fitting of Valves to gas cylinders
  NIS ISO 11625 2021 Gas Cylinders- Safe Handling
  NIS ISO 11621 2021 Gas Cylinders- Procedure for Change of Gas Service
  NIS ISO 18119 2021 Gas Cylinders- Seamless Steel and Seamless Aluminium-Alloy Gas Cylinders and Tubes — Periodic Inspection and Testing
  NIS ISO 16148 2021 Gas Cylinders- Refillable Seamless Steel Gas Cylinders and Tubes — Acoustic Emission Examination (AT) and follow-up Ultrasonic Examination (UT) for Periodic Inspection and Testing
  NIS ISO 10460 2021 Gas Cylinders- Welded Aluminium Alloy, Carbon and Stainless Steel Gas Cylinders — Periodic inspection and testing
  NIS ISO 3807 2021 Gas Cylinders-Acetylene Cylinders - Basic requirements and type testing
  NIS ISO 11755 2021 Gas Cylinders- Cylinder bundles for compressed and liquefied gases (excluding acetylene)-Inspection at time of filling
  NIS ISO 11623 2021 Gas Cylinders- Composite construction –Periodic Inspection and testing
  NIS ISO 11117 2021 Gas Cylinders — Valve protection caps and guards — Design, construction and tests
  NIS ISO 5145 2021 Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning
  NIS ISO 9809-1 2021 Gas Cylinders – Design, Construction and testing of refillable seamless steel gas cylinders and tubes – Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1100 Mpa
  NIS ISO 9809-2 2021 Gas Cylinders –Design, Construction and testing of refillable seamless steel gas cylinders and tubes Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal 1100 Mpa
  NIS ISO 9809-3 2021 Gas Cylinders – Design, Construction and testing of refillable seamless steel gas cylinders and tubes Part 3: Normalised steel cylinders and tubes.
  NIS ISO 11114-1 2021 Gas Cylinders- Compatibility of Cylinder and Valve Materials with Gas Contents– Part 1: Metallic materials
  NIS ISO 11114-2 2021 Gas Cylinders- Compatibility of Cylinder and Valve Materials with Gas Contents– Part 2: Non-metallic materials
  NIS ISO 11114-3 2021 Gas Cylinders- Compatibility of Cylinder and Valve Materials with Gas Contents– Part 3: Autogenous Ignition Tests for Non-metallic Materials in Oxygen Atmosphere
  NIS ISO 11114-4 2021 Gas Cylinders- Compatibility of Cylinder and Valve Materials with Gas Contents– Part 4: Test Methods for Selecting Steels Resistant to Hydrogen Embrittlement
  NIS ISO 4175 2021 Shipbuilding — Shipborne barges, series 1 — Main dimensions
  NIS ISO 6765 2021 Shipbuilding — Shipborne barges. series 3 — Main dimensions
  NIS ISO 6766 2021 Shipbuilding — Shipborne barges, series 4 — Main dimensions
  NIS ISO 7222 2021 Shipbuilding — Shipborne barges. series 2 — Main dimensions
  NIS ISO 9382 2021 Shipbuilding — Shipborne barges, all series — Classification and main requirements
  NIS ISO 15084 2021 Small craft - Anchoring, mooring and towing
  NIS ISO 7607 2021 Shipbuilding - Inland Navigations- Multi- Bucket Dredgers- Scale of Bucket Capacities
  NIS ISO 8384 2021 Ships and Marine Technology - Dredgers- Vocabulary
  NIS ISO 8385 2021 Ships and Marine Technology - Dredgers- Classification
  NIS ISO 20661 2021 Ships and Marine Technology - Cutter Suction Dredger Supervisory and Control Systems
  NIS ISO 20662 2021 Ships and Marine Technology - Hopper Dredgers
  NIS ISO 20663 2021 Ships and Marine Technology - Grab Dredgers- Classification
  NIS ISO 2232 2021 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications
  NIS ISO 2408 2021 Steel wire ropes - Requirements
  NIS ISO 3108 2021 Steel wire ropes - Test method - Determination of measured breaking force
  NIS ISO 4345 2021 Steel wire ropes - Fibre main cores - Specification
  NIS ISO 7531 2021 Wire rope slings for general purposes – Characteristics and specifications
  NIS ISO 7800 2021 Metallic materials - Wire - Simple torsion test
  NIS ISO 7802 2021 Metallic materials - Wire - Wrapping test
  NIS ISO 8792 2021 Wire rope slings – Safety criteria and inspection procedures for use
  NIS ISO 8793 2021 Steel wire ropes - Ferrule-secured eye terminations
  NIS ISO 8794 2021 Steel wire ropes - Spliced eye terminations for slings
  NIS ISO 17893 2021 Steel wire ropes - Vocabulary, designation and classification
  NIS ISO 15750-1 2021 Packaging-Steel drums - Part1: Removeable head (open head) drums with a minimum total capacity of 208 L, 210 L and 216.5 L
  NIS ISO 15750-2 2021 Packaging-Steel drums - Part 2: Non-removeable head (tight head) drums with a minimum total capacity of 212 L, 216.5 L and 230 L
  NIS ISO 15750-3 2021 Part 3: Inserted flange-type closure systems
  65.060 NIS 1011 2019 Specification for Grinding Plate for food Application
  . NIS 1012 2019 Specification for Driving Plate for food Application
  65.060 NIS 1013 2019 Standard for Grinding Machine
  43.060.40 NIS ISO 4020 2018 Road vehicles - Fuel filters for diesel engines - Test methods
  77.140.50 NIS ISO 3574 1986 Cold reduced carbon steel sheet of commercial and drawing qualities
  23.020.30 NCP 58 2017 General handling and control of LPG cylinder
  23.020.30 NCP 59 2017 Code of practice on general handling and control of LPG vessels for storage of liquefied petroleum gas (LPG)
  23.020.30 NCP 60 2017 Welded low carbon steel cylinders for low pressure liquefiable gases - Code of practice for inspection and reconditioning of used LPG cylinders
  03.220.20 NCP 61 2017 Code of Practice for Cargo Securing for Road Transport
  43.060.40 NIS ISO 4020 2018 Road vehicles - Fuel filters for diesel engines - Test methods
  23.020.30 NCP 060 2017 Welded low carbon steel cylinders for low pressure liquefiable gases - Code of practice for inspection and reconditioning of used LPG cylinders
  43.040.70 NIS 783 2013 Standard for three wheeler auto vehicle
  25.160.10 NIS 20 1974 General requirements for oxyacetylene welding of mild steel
  25.160.10 NIS 21 1974 Specification for metal arc welding of carbon and carbon manganese steels
  77.040.10 NIS 32 1982 Methods for sample torsion tests testing of steel wires
  77.040.10 NIS 33 1973 Methods for testing galvanized Coatings on iron and steels products
  77.140.65 NIS 56 1973 Specification for mild steel wire for general engineering purposes
  25.22.50 NIS 62 1980 Nigerian specifications for aluminum cooking utensils
  35.260.20 NIS 67 1975 Nigerian standards for Typewriter
  13.340.20 NIS 68 1975 Standards for protective helmets for motor cyclists
  23.020.30 NIS 69 2013 Specification for refillable liquefied petroleum gas cylinder
  23.040.01 NIS 70 1975 Specification for cast iron pressure pipes for water sewage and gas
  21.060.50 NIS 118 1981 Mild steel wire nails
  01.100.01 NIS 120 1980 Technical drawing lettering
  17.020 NIS 122 1980 Preferred number, basic series more rounded valves and guide to their use.
  25.220.40 NIS 123 1982 Metallic coatings, coatings other than those anoxic to the basic metal accelerated corrosion test method for the valuation of the real results
  25.220.40 NIS 124 1980 Specification for corrosion protection phosphate treatment of iron and steel
  77.060 NIS 133 1981 Inter-granular corrosion for austenitic stainless steel
  43.040.20 NIS 134 1980 Road vehicle lighting and signaling
  43.040.60 NIS 145 1984 Road vehicles-Requirements for shock absorbers for motor vehicles.
  43.080.10 NIS 148 1982 Road vehicles: inspection and testing procedure for motor vehicles trailer and semi trailer
  43.040.60 NIS 154 1982 Specification for rear view mirrors
  77.040.10 NIS 166 1982 Method for tensile testing of metals
  01.040.77 NIS 167 1982 Glossary of terms relating to iron and steel in the steel making industry
  59.080.01 NIS 174 1983 Standards on methods of testing machine for tensile testing systems
  23.120 NIS 176 1983 Methods of determination of K values of tensile testing systems
  91.080.10 NIS 180 2012 Specification for galvanized corrugated steel sheets
  17.020 NIS 189 1985 S.I. units and recommendations for the use of their multiples and of certain other units
  17.020 NIS 190-0 1985 General principles concerning quantities, units and symbols
  17.080 NIS 190-1 1985 Quantities and units of space and time Part 1
  17.240 NIS 190-10 1985 Quantities and units of atomic and nuclear reaction and ionizing radiation part 10
  17.120.10 NIS 190-11 1985 Mathematical signs and symbols for use in physical sciences and technology Part 11
  17.060 NIS 190-12 1985 Dimensionless parameters Part 1
  17.100 NIS 190-13 1985 Quantities and units of solid state physics Parts 13.
  17.080 NIS 190-2 1985 Quantities and unit of periodic and related phenomena Part 2
  17.140.20 NIS 190-3 1985 Quantities and units of mechanics Part 3
  17.220.01 NIS 190-4 1985 Quantities and units of heat Part 4
  17.200.10 NIS 190-5 1985 Quantities and units of electricity and magnetic Part 5
  17.180.20 NIS 190-6 1985 Quantities and units of light related electric magnetic radiation Part 6
  17.140.01 NIS 190-7 1985 Quantities and units of acoustics Part 7
  17.060 NIS 190-8 1985 Quantities and units of physical chemistry and modular physics Part 8
  17.240 NIS 190-9 1985 Quantities and units of atomic and nuclear physics Part 9
  43.060.30 NIS 191 1985 Specification for throw away type oil filters-Road vehicles
  43.060.30 NIS 191-2 1985 Specification for throw away type oil filters-Road vehicles
  43.060.30 NIS 192-1 1984 Specification for throw-away type oil filters for automotive engines Part 1.
  43.060.30 NIS 192-2 1984 Resistance to high-pressure drop and to elevate temperatures (Part 2)
  01.040.43 NIS 193 1984 Standard on road vehicle weights vocabulary
  01.040.43 NIS 193-1 1984 Standard on road vehicle weights vocabulary
  43.040.40 NIS 194 1984 Standard on road vehicles: Passenger car braking systems measurement of brake performance
  77.080.20 NIS 196 1984 Specification for carbon steel billets, Blooms and slabs for re-rolling into structural steel.
  77.080.20 NIS 197 1984 Specification for structural steel
  23.040.01 NIS 198 1984 Specification for steel pipe (welded and secunless) for water pipes.
  77.040.10 NIS 199 1984 Method of testing of steel
  77.060.10 NIS 200 1984 Method of impact testing of metals Part 1 (120D)
  77.040.10 NIS 201 1984 Method of conversion of elongation valves for steel Part 1: carbon and low alloy steel
  43.020 NIS 214 1985 Standardization for motor vehicle industry
  53.120 NIS 215 1985 Specification for shovels for general purposes
  77.080.20 NIS 216 1985 Verification of Rockwell B and C scale hardness testing machines
  67.140 NIS 220 1985 Specification for liquefied petroleum gas cylinder regulators and valves
  43.020 NIS 224 1987 Road vehicles Registration for Govt. approval inspection station
  25.160.40 NIS 227 1987 Welded wire mesh for general purposes.
  23.040.01 NIS 240 1988 Standard on welded black and galvanized
  97.040.60 NIS 242 1988 Specification for machetss for general use
  77.040.10 NIS 275 1990 Metallic materials- Tube flattening test
  77.040.10 NIS 280 1990 Reverse bend test for steel wire- Test method
  77.040.10 NIS 281 1990 Wrapping test for steel wire-Test method
  43.020 NIS 296 1993 Code of practice for establishment of driving schools in Nigeria (Withdrawn, see NCP 07:1993)
  61.080 NIS 297 1993 Standard for general requirements for straight stitch sewing machined for domestic purposes
  43.080.10 NIS 301 2004 Standard for trailers
  47.020.85 NIS 302 2004 Specification for oil mobile tankers (see NIS 529:2006)
  39.040.20 NIS 311 1997 Standards particular requirement for Clocks
  77.150.10 NIS 313 1997 Standard for adjustable mild steel louver frame
  77.140.65 NIS 314 1997 Standard for chain-link wire fencing.
  77.140.65 NIS 315 1997 Standard for barbed wire
  77.140.65 NIS 316 1997 Standard for hexagonal wire netting
  01.040.65 NIS 317 1997 Standard for agricultural engineering Machinery: Terminology for tillage and tillage equipment.
  65.060.30 NIS 318 1997 Standard agricultural engineering machinery: Test code for Agricultural Tillage Disc.
  65.060.30 NIS 319 1997 Standard for agricultural engineering machinery: Test code for maize Sheller.
  65.060.50 NIS 320 1997 Standard for agricultural engineering machinery: Test code for grain and seed cleaner
  65.060.50 NIS 321 1997 Standards for agricultural engineering machinery: Test code for groundnut Sheller
  65.060.50 NIS 322 1997 Standard for agricultural engineering machinery: Test code for concave disc (Part 1 & 2)
  43.040.40 NIS 323 1997 Standard for brake pads and linings
  23.040.10 NIS 324 1997 Specification for steel tubes for mechanical and general engineering purposes
  23.100.10 NIS 326 1997 General requirement for deepwell hand pump (Ruwatsan 2 for rural water supply
  23.100.10 NIS 327 1997 General requirement for direct action hand pump for rural water supply
  61.080 NIS 355 1997 Standard for particular requirement for sewing machines
  01.080.01 NIS 384 1997 Standard for letters symbols
  01.040 NIS 385 1997 Standard for vocabulary of fundamental concept
  43.140 NIS 414 2000 Specification for motorcycle chains
  77.140.65 NIS 415 2000 Specification for small wire ropes.
  77.140.65 NIS 416 2000 Specification for galvanized steel wire ropes for ships
  67.220.20 NIS 417 2000 Specification for stranded wire robes for mine hoisting winding purposes
  77.140.65 NIS 418 2000 Specification for wire robes for cranes excavators and general engineering purposes
  59.080.01 NIS 456 2003 Specification for inspection and testing of unfired pressure vessels for the storage of liquefied petroleum gas (LPG)
  91.060.20 NIS 487 2010 Test method for profiled aluminum roofing sheet for roofing and Cladding
  91.060.20 NIS 488 2010 Specification for profiled aluminum roofing sheet for roofing
  77.040.10 NIS 499 2004 Standard for iron and steel
  77.140.65 NIS 502 2004 Standard for barbed wire
  77.040 NIS 529 2017 Specification for bulk road vehicle
  75.200 NIS 530 2006 Specification for refillable liquefied petroleum gas (LPG)
  75.200 NIS 531 2006 Specification for carbon steel welded horizontal cylinder storage tanks
  75.200 NIS 532 2006 Transportable refillable welded steel cylinder for liquefied petroleum gas (LPG)-Periodic qualification
  97.170 NIS 623 2008 Standard for disposable safety razors
  97.170 NIS 624 2008 Standard for stainless razor blades
  43.040.70 NIS 625 2008 Standard for wheel barrow
  43.040.65 DNIS 630 2010 Standard forsilver glass mirrors for general purpose use
  65.020.99 DNIS 641 2010 Standard for weight and measures for agricultural products.
  77.080.20 NIS 66-1 1975 Method for Brunel hardness for metals Pt1
  77.080.20 NIS 66-2 1975 Method for Brunel hardness for metals Part II
  67.120.30 NIS 687 2009 Standard for Fish hooks
  43.150 NIS 688 2007 Standard for safety requirements for Bicycles
  97.200.40 NIS 689-1 2007 Standard for playground equipment-part 1: General safety requirement an dtest methods
  97.200.40 NIS 689-2 2007 Standard for playground equipment- part 2: Additional specific safety requirement and test methods for swings
  97.200.40 NIS 689-3 2007 Standard for playground equipment- part 3:Addiotnal specific safety requirement and test method for slides.
  97.200.40 NIS 689-4 2007 Standard for playground equipment- part 4: Additional specific safety requirement and test method for runways
  97.200.40 NIS 689-5 2007 Standard for playground equipment- part 5: Additional specific safety requirement and test method for carousels
  97.200.40 NIS 689-6 2007 Standard for playground equipment- part 6: Additional specific safety requirement and test method for rocking equipments
  97.200.40 NIS 689-7 2007 Standard for playground equipment- part 7: Guidelines on Installation, Inspection
  97.200.40 NIS 689-8 2007 Standard for playground equipment- part 8: Impact absorbing playground surface- safety requirements and test methods
  43.040.65 DNIS 696 2010 Standard for Automative vehicles-electrical and screen wiper (Wiper Arms)
  43.040.65 DNIS 697 2010 Specification for electrical wind screen wipers (wiper blades)
  43.040.65 DNIS 698 2010 Specification for electrical wind screen wipers ( wiper motors)
  43.040.65 DNIS 699 2010 Automotive Vehicles-Break Lining (Non-rubberized)
  43.040.65 NIS 700 2010 Automotive Vehicles- windscreen wiping system for 3 wheeler vehicles and vehicles treated as such.
  43.040.65 NIS 701 2010 Automative vehicles-windscreen wiping and washing systems for MI category of vehicles
  43.040.99 NIS 703 2010 Procedure for performance evaluation on Rubber to metal bonded components
  43.040.50 NIS 704 2010 Automotive Vehicles- wheels rims for two and three wheeled vehiclesspoke wheel rims (method of test and requirements).
  43.100 NIS 705 2010 Installation requirements of lighting and light signally devices for motor vehicle having more than three wheels, trailer and semi-trailer
  43.040.20 NIS 706 2010 Auto lamp
  43.040.99 NIS 707 2010 Procedure for performance evaluation on rubber to metal bonded component.
  43.040.080 NIS 708 2010 Specification for automotive timing belts
  43.040.65 NIS 709 2010 Automotive vehicle-Rea view mirrors specification
  43.040.65 NIS 710 2010 Automotive Vehicles-Testing procedure for windscreen wiping system for 4 wheelers
  43.060.99 NIS 711 2010 Classification and Test requirements for automotive Rubber Gaskets
  43.060.99 NIS 712 2010 Classification for oil seals and O Rings for automotive application
  43.040.65 NIS 713 2010 Specification for Electrical and screen wiper-wiper system
  77.140.50 NIS 715 2010 Specification for Hot Rolled patterned weldable floor steel plate for general engineering use
  43.080.20 NIS 716 2010 Guidelines for school bus operation
  43.080.20 NIS 717 2010 Specification for school bus
  43.030 NCP 07 1993 Code of practice for establishment of driving school in Nigeria
  17.020 NCP 18 2006 Code of practice for used vehicles: part 1
  97.220.40 NCP 037 2012 Code of practice for inland, inshore and offshore diving and underwater operations
  97.220.40 NCP 038 2012 Specification for commercial divers training
  NCP 039 2013 Code of practice for Nigerian Telematics industry
  19.040 NIS IEC 60068 2-1 1990 Environment testing -part 2: Test-Test A: Cold
  19.040 NIS IEC 60068 2-28 1974 Environment testing -part 2: Test-Test B: Dry heat
  19.040 NIS IEC 60068 2-3 1969 Test: Damp heat, Steady state
  19.040 NIS IEC 60068-2-28 1990 Environmental testing -part 2:T est-Guidance for Damp heat
  19.040 NIS IEC 60068-2-31 1969 Environmental testing part 2:Test-Test EC: Dup and Tripple , primary for equipment type specimen and its amendment 1:1982
  19.040 NIS IEC 60068-2-34 1973 Environmental testing part 2: Test-Test FD: Random vibration wide band-General requirements
  19.040 NIS IEC 60068-2-36 1973 Environmental testing -part 2: Test-Test Fdb: Random vibration wide band-Reproducibility medium and its amendment 1; 1983
  19.040 NIS IEC 60068-3-1 1974 Environmental testing -part 3: Background information-section 1: Cold and Dry heat test
  19.040 NIS IEC 60068-3-1A 1978 Environmental testing -part 3: Background information-First supplement
  33.100 NIS IEC 61000-4-2 1995 Electromagnetic compatibility (EMC)- part 4: Testing and measurement technique-section 2: Electro static discharge immunity tests
  33.100 NIS IEC 61000-4-3 1998 Electromagnetic compatibility (EMC)- part 4: Testing and measurement technique-section 3: Radiated ,radio-frequency, electromagnetic field immunity test
  33.100 NIS IEC 61000-4-4 1995 Electromagnetic compatibility (EMC)- part 4: Testing and measurement technique-section 4: Electrical fast transient/burst immunity test
  33.100 NIS IEC 61000-4-6 1996 Electromagnetic compatibility (EMC) - part 4: Testing and measurement technique-section 6:Immunity to conducted disturbances induced by radio frequency fields
  NIS ISO 10042 2005 Welding-Arc- welded joints in aluminium and its alloys-Quality levels for imperfections
  23.020.30 NIS ISO 10286 2007 Gas cylinders-Terminology
  23.020.30 NIS ISO 10297 2006 Transportable gas cylinders-Cylinder valves- specification and type testing
  23.020.30 NIS ISO 10460 2005 Gas cylinders-Welded carbon-steel gas cylinders-periodic inspection and testing
  23.020.30 NIS ISO 10461 1993 Seamless aluminium-alloy gas cylinders, periodic inspection and test
  23.020.30 NIS ISO 10463 0 Cylinders for permanent gases-Inspection at time of filling
  23.020.30 NIS ISO 10464 0 Gas cylinders-Refillable welded steel cylinders for liquefied petroleum gas (LPG)-Periodic inspection and testing
  NIS ISO 10618 0 Carbon fibre-Determination of tensile properties of resin-impregnated yarn
  23.020.30 NIS ISO 10691 2004 Gas cylinders-refillable welded steel cylinders for liquefied petroleum gas (LPG)-Procedures for checking before, during and after filling
  NIS ISO 10920 0 Gas cylinders-25E taper thread for connection of valves to gas cylinders-Specification
  NIS ISO 11113 0 Cylinders for liquefied gases (excluding acetylene and LPG)-Inspection at time of filling
  23.020.30 NIS ISO 11114-1 2012 Gas cylinders-compatibility of cylinder and valve materials with gas contents-part:1 Metallic materials
  NIS ISO 11114-2 0 Gas cylinders-Compatibility of cylinder and valve materials with gas contents-part 2: Non-metallic materials
  NIS ISO 11114-3 0 Gas cylinders-Compatibility of cylinder and valve materials with gas contents-part 3:
  NIS ISO 11116-1 0 Gas cylinders-17E taper thread for connection of valve to gas cylinders-part 1:Specification
  NIS ISO 11117 0 Gas cylinders-Valve protection caps and valve guards for industrial and medical gas cylinders-Design, construction and tests
  23.020.30 NIS ISO 11118 1999 Gas cylinders-Non-refillable metallic gas cylinders-Specification and test methods
  23.020.30 NIS ISO 11119-2 2012 Gas cylinders-Refillable composite Gas cylinders and tubes-Design, construction and testing-Part: 2 :Fully rapped fibre reinforced composite gas cylinders and tubes up to 450 L with load -sharing metal liners
  23.020.30 NIS ISO 11119-3 2002 Gas cylinders composite construction-specification and test methods-part 3: Fully rapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non metallic liners
  23.020.30 NIS ISO 11120 1999 Gas cylinders -Refillable seamless steel tubes of water capacity between 1501 and30001-Design, construction and testing
  23.020.30 NIS ISO 1117 2008 Gas cylinders-Valve protection caps and valve guards-Design, construction and tests
  NIS ISO 11191 1997 Gas cylinders-25E taper thread for connection of valves to gas cylinders-Inspection gauge
  83.080.20 NIS ISO 1133 2005 Plastics-Determination of the melt volume-flow rate (MVR) of the thermoplastics
  23.020.30 NIS ISO 11363-1 2010 Gas cylinders -17 E and 25 E taper treads for connection of valves to gas cylinders-part 1: specification
  23.020.30 NIS ISO 11363-2 2010 Gas cylinders -17 E and 25 E taper treads for connection of valves to gas cylinders-part 2: Inspection gauge
  NIS ISO 11372 0 Gas cylinders-Cylinders for dissolved acetylene-Inspection at time of filling
  43.060.40 NIS ISO 11439 2000 Gas cylinder-High pressure cylinder for the on-board storage of natural gas as a fuel for automotive vehicles
  43.060.30 NIS ISO 114469-3 2006 Road vehicles-Compressed natural gas (CNG) refueling connector- part3: 25 MPa (250 bar) connector
  NIS ISO 11484 0 Steel tubes for pressure purposes-Qualification and certification of non-destructive testing NDT) personnel
  23.020.30 NIS ISO 11621 1997 Gas cylinders -Procedures for change of gas
  NIS ISO 11622 0 Gas cylinders-Conditions for filling gas cylinder
  23.020.30 NIS ISO 11623 2002 Transportable gas cylinders -periodic inspection and testing of composite gas cylinders
  23.020.30 NIS ISO 11625 2007 Gas cylinders -Safe handling
  23.040.10 NIS ISO 1167-1 0 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids-Determination of the resistance to internal pressure-Part 1: General method
  23.040.20 NIS ISO 1167-2 0 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids-Determination of the resistance to internal pressure-Part 2: Preparation of pipe test pieces
  23.040.20 NIS ISO 1167-4 0 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids-Determination of the resistance to internal pressure-Part 4: Preparation of assemblies 2
  23.020.40 NIS ISO 11755 2005 Gas cylinders-cylinder bundles for compressed and liquefied gases (excluding acytylene)-Inspection at time of filling
  23.020.30 NIS ISO 11759 1999 Rubber hose assemblies for dispensing liquefied petroleum gases (LPGs) -Specification
  01.040.43 NIS ISO 1176 1980 Road vehicles-Masses-vocabulary and codes
  83.140.01 NIS ISO 1183-1 0 Plastics-Methods for determining the density of non -cellular plastics-part 1 : Immersion method, liquid pyknometer and titration method
  83.140.01 NIS ISO 1183-2 0 Plastics-Methods for determining the density of non -cellular plastics-part 2 :Density gradient column method
  NIS ISO 11922-1 1997 Thermoplastics pipes for the conveyance of fluids-Dimensions and tolerances- part 1: Metric series
  NIS ISO 11960 0 Petroleum and natural gas industries-Steel pipes for use as casing or tubing for wells
  NIS ISO 12162 0 Thermoplastics materials for pipes and fittings for pressure applications-Classification, designation and design coefficient
  NIS ISO 12176-1 0 Plastics pipes and fittings-Equipment for fusion jointing polyethylene systems- part 1: Butt fusion
  NIS ISO 12176-2 0 Plastics pipes and fittings-Equipment for fusion jointing polyethylene systems- part 2: Electrofusion
  NIS ISO 12176-3 0 Plastics pipes and fittings-Equipment for fusion jointing polyethylene systems- part 3: Operators badge
  01.040.43 NIS ISO 12353-1 2002 Road vehicles-Traffic accident analysis part 1: Vocabulary
  23.040.20 NIS ISO 12991 2012 Liquefied natural gas (LNG)-Tanks for on-board storage as a fuel for automotive vehicles
  83.140.01 NIS ISO 1307 1992 Rubber and plastics hoses for general-purpose industrial applications-Bore diameters and tolerances, and tolerances on length
  43.040.80 NIS ISO 13216-1 1999 Road vehicles-Anchorage in vehicles and attachments to anchorage for child restraint system-part 1: Seat bight anchorage and attachments
  43.020 NIS ISO 13218 1998 Road vehicles-Child restraint systems-Report for accidents involving child passengers
  23.020.30 NIS ISO 13340 2001 Transportable gas cylinders-Cylinder valves for non refillable cylinders-specification and prototype testing
  23.020.30 NIS ISO 13341 2010 Gas cylinders-Fitting of valves to gas cylinders
  NIS ISO 13679 2007 Gas cylinders-Stamp marking
  NIS ISO 13769 2002 Gas cylinders-Stamp marking
  23.020.30 NIS ISO 14245 2006 Gas cylinders-Specifications and testing of LPG cylinder valves-self closing
  23.020.30 NIS ISO 14246 2001 Transportable gas cylinders-Gas cylinder valves-Manufacturing tests and inspections
  43.120 NIS ISO 14400 2005 Road Vehicles Wheels and rims- Use, general maintenance and safety requirements and out-of-service conditions
  43.060.30 NIS ISO 14469-1 2004 Road vehicles-Compressed natural gas (CNG) refueling connector- part 1: 20 MPa (200 bar ) connector
  43.060.30 NIS ISO 14469-2 2007 Road vehicles-Compressed natural gas (CNG) refueling connector- part 2: 20 MPa (200 bar ) connector, size 2
  43.060.40 NIS ISO 14681 1998 Diesel engines-Fuel injection pump testing-Calibrating fuel injector
  77.040 NIS ISO 148 1983 Steel-Charpy impact test (V- notch)
  43.120 NIS ISO 15005 2002 Road Vehicles- Ergonomic aspects of transport information and control systems -Dialogue management principles and compliance procedure
  43.120 NIS ISO 15006 2004 Road Vehicles- Ergonomic aspect of transport information and control Systems- Specifications and Compliance procedures for in-vehicle auditory presentation NIS ISO 15006
  43.040.15 NIS ISO 15008 2009 Road Vehicles - Ergonomic aspect of transport information and control Systems -Specifications and test procedures for in-vehicle visual presentation
  43.040.65 NIS ISO 15082 0 Road vehicles-Test for rigid plastic safety glazing material
  23.020.30 NIS ISO 15245-1 2001 Gas cylinders-parallel threads for connection of valves to gas cylinders part 1: Specification
  43.060.40 NIS ISO 15500-1 2001 Road vehicles-Compressed natural gas (CNG) fuel systems -part 1: safety requirement
  43.060.40 NIS ISO 15500-10 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 10: Gas flow adjustment
  43.060.40 NIS ISO 15500-11 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 11:Gas/air mixer
  43.060.40 NIS ISO 15500-12 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 12: Pressure relief valve (PRV)
  43.060.40 NIS ISO 15500-13 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 13: Pressure relief device (PRD)
  43.060.40 NIS ISO 15500-14 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 14: Excess flow valve
  43.060.40 NIS ISO 15500-15 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 15: Gas tight housing and ventilation hose
  43.060.40 NIS ISO 15500-16 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 16: Rigid fuel line
  43.060.40 NIS ISO 15500-17 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 17: Flexible fuel line
  43.060.40 NIS ISO 15500-18 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 18: Filter
  43.060.40 NIS ISO 15500-19 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 19: Fittings
  43.060.40 NIS ISO 15500-2 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 2: Performance and general test methods
  43.060.40 NIS ISO 15500-20 2007 Road vehicles-Compressed natural gas (CNG) fuel system components-part 20: Rigid fuel line in material other than stainless steel
  43.060.40 NIS ISO 15500-3 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 3: Check valve
  43.060.40 NIS ISO 15500-5 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 5: Manual cylinder valve
  43.060.40 NIS ISO 15500-6 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 6: Automatic valve
  43.060.40 NIS ISO 15500-7 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 7: Gas injector
  43.060.40 NIS ISO 15500-8 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 8: Pressure indicator
  43.060.40 NIS ISO 15500-9 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 9: Pressure regulator
  43.060.40 NIS ISO 15501-1 2001 Road vehicles-Compressed natural gas (CNG) fuel system components-part 1: General requirements and definitions
  43.060.40 NIS ISO 15501-2 2004 Road vehicles-Compressed natural gas (CNG) fuel systems- part 2: Test methods
  25.160 NIS ISO 15613 0 Specification and qualification of welding procedures for metallic materials -Qualification based on pre-production welding test
  25.160 NIS ISO 15614-1 0 Specification and qualification of welding procedures for metallic materials -Welding procedure test-part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
  25.160 NIS ISO 15614-2 2005 Specification and qualification of welding procedures for metallic materials -Welding procedure test-part 2: Arc welding of aluminum and its alloys
  43.040.20 NIS ISO 15763 1999 Road vehicles-Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3, 5 t
  23.020.30 NIS ISO 15995 2006 Gas cylinders-Specifications and testing of LPG cylinder valves-Manually operated
  23.020.30 NIS ISO 15996 2005 Gas cylinders-Residual pressure valves-General requirements and type testing
  83.080.20 NIS ISO 161-1 0 Thermoplastics pipes for the conveyance of fluids-Nominal outside diameters and nominal pressures -part 1: Metric series
  23.020.30 NIS ISO 16528-1 2007 Boilers and pressure vessels-Part 1 : Performance requirements
  43.040.40 NIS ISO 1726 2000 Road Vehicles - Mechanical coupling between tractors and semi-trailers Interchangeability
  43.040.70 NIS ISO 1726-2 0 Road vehicles-Mechanical couplings between tractors and semi-trailers part 2-Interchangeability between low-couplings tractor and high-volume semi-trailers
  43.040.70 NIS ISO 1726-3 2010 Road vehicles-Mechanical couplings between tractors and semi-trailers part 3-Requirements for semi-trailer contact area to fifth wheel
  43.040.40 NIS ISO 1728 2006 Pneumatic braking connectors between motor vehicle s and towed vehicles-Interchange ability
  83.140.01 NIS ISO 1746 1998 Rubber or plastics and tubing -Bending tests
  25.160.40 NIS ISO 17636 0 Non-destructive testing of welds-Radiographic testing of fusion-welded joints
  25.160.40 NIS ISO 17637 0 Non-destructive testing of welds-Visual testing of fusion-welded joints
  25.160.40 NIS ISO 17639 0 Destructive tests on welds in metallic materials-Macroscopic and microscopic examination of welds
  83.080.10 NIS ISO 179-1 2000 Plastics-Determination of Charpy impact properties-Part 1: Non -instrumented impact test
  23.020.30 NIS ISO 18172-2 2007 Gas cylinders-Refillable welded stainless steel cylinders- Part2: Test pressure greater than6 MPa
  83.080.10 NIS ISO 188 1998 Rubber, vulcanized or thermoplastic-Accelerated ageing and heat resistance tests
  23.020.20 NIS ISO 2029-1 2004 Cryogenic vessels-Transportable vacuum insulated vessels-of not more than 1000 litres volume-Part 1: Design, fabrication, inspection and tests
  23.020.30 NIS ISO 21013-3 0 Cryogenic vessels-Pressure-relief accessories for cryogenic service -part 3: Sizing and capacity determination
  23.020.30 NIS ISO 21014 0 Cryogenic vessels-Cryogenic insulation performance
  23.020.20 NIS ISO 21028-1 0 Cryogenic vessels-Toughness requirements for materials at cryogenic temperatures-part: 1: Temperature below-80 degrees C
  23.020.30 NIS ISO 22434 2006 Transportable gas cylinders-Inspection and maintenance of cylinder valves
  23.020.30 NIS ISO 22435 2007 Gas cylinders-cylinder valves with integrated pressure regulators-specification and type testing
  75.200 NIS ISO 22621-1 2007 Plastic piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -Polyamide (PA)-Part 1: General
  75.200 NIS ISO 22621-2 2007 Plastic piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -Polyamide (PA)-Part 2:Pipes
  75.200 NIS ISO 22621-3 2007 Plastic piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -Polyamide (PA)-Part 3:Fittings
  75.200 NIS ISO 22621-5 2007 Plastic piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -Polyamide (PA)-Part 5:Fitness for the purpose of the system
  75.200 NIS ISO 22621-6 2010 Plastic piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) -Polyamide (PA)-Part 6:Fitness for the purpose of the system
  25.160.30 NIS ISO 2303 1998 Gas welding equipment-Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
  27.060.20 NIS ISO 23551-2 2006 Safety and control devices for gas burners and gas-burning appliances-Particular requirements-Part 2: Pressure regulators
  27.060.20 NIS ISO 23551-3 2005 Safety and control devices for gas burners and gas-burning appliances-Particular requirements-Part 3:Gas/ air ratio controls pneumatic type
  27.060.20 NIS ISO 23551-4 2005 Safety and control devices for gas burners and gas-burning appliances-Particular requirements-Part 4: Valve-proving systems for automatic shut-off valves
  43.080.20 NIS ISO 2416 1992 Passenger cars - Mass distribution
  23.020.40 NIS ISO 24431 2006 Gas cylinders-cylinder for compressed and liquefied gases (excluding acytylene)-Inspection at time of filling
  23.040.20 NIS ISO 2505 2005 Thermoplastics pipes-Longitudinal reversion-Test method and parameters
  43.100.10 NIS ISO 2534 1998 Road Vehicles - Engine test code - Gross power
  01.08.20 NIS ISO 2575 2010 Road vehicles-Symbols for controls, indicators and tell-tales
  23.040.40 NIS ISO 25760 2009 Gas cylinders-operational procedures for the safe removal of valves from gas cylinders
  21.040.01 NIS ISO 261 0 General-purpose metric screw threads General plan
  17.040.10 NIS ISO 2768-1 1989 General tolerances-part 1:Tolerances for linear and angular dimensions without individual tolerance indication
  43.040.40 NIS ISO 2958 1973 Road vehicles-Exterior protection for passenger cars
  43.100 NIS ISO 3006 2004 Road Vehicles - Passenger car wheels for road use - Test methods
  11.040.10 NIS ISO 32 1977 Gas cylinders for medical use -Marking for identification of content
  43.020 NIS ISO 3208 1974 Road Vehicles - Eveluation of protrusions inside passenger cars
  25.160.30 NIS ISO 3253 1998 Gas welding equipment -Hose connections for equipment for welding, cutting and allied processes
  43.120 NIS ISO 3267 1991 Road Vehicles - Headlamp cleaners
  43.100.20 NIS ISO 3409 1975 Passenger cars - lateral spacing of foot control
  43.100 NIS ISO 3469 1989 Passenger cars - Windscreen washing systems - Test methods
  43.040.65 NIS ISO 3470 1989 Passenger cars-Windscreen demisting systems-test method
  01.040.43 NIS ISO 3536 1998 Road vehicle-Safety glazing material-vocabulary
  43.040.65 NIS ISO 3538 1997 Road vehicles-Safety glazing materials-Test methods for optical properties
  43.040.40 NIS ISO 3583 1984 Road vehicles-pressure test connection for compressed-air pneumatic braking equipment
  11.83.080.20 NIS ISO 37 0 Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties
  23.020.30 NIS ISO 3807-1 2000 Cylinder for acetylene-Basic requirement part 1:Cylinders without fusible plugs
  23.020.30 NIS ISO 3807-2 2000 Cylinder for acetylene-Basic requirement part 2: Cylinders without fusible plugs
  23.020.30 NIS ISO 38072 0 Dissolved acetylene cylinders-Basic requirement
  43.100 NIS ISO 3832 2002 Passenger cars - Luggage compartments - Method of measuring reference volume
  43.080.10 NIS ISO 3853 1994 Road Vehicles - Towing vehicle coupling device to toqw caravans or light trailers - Mechanical strength test
  43.080 NIS ISO 3929 2003 Road Vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
  43.080.10 NIS ISO 3930 2000 Instrument for measuring vehicle exhaust emissions
  43.040.30 NIS ISO 3958 1996 Passenger cars- driver hand-control reach
  43.040.30 NIS ISO 3996 1995 Road vehicles-Brake hose assemblies for hydraulic braking systems used with non petroleum-base brake fluid
  43.060.40 NIS ISO 4008-1 1980 Road vehicles-Fuel injection pump testing-part 1: Dynamic conditions
  43.060.40 NIS ISO 4008-2 1983 Road vehicles-Fuel injection pump testing-part 2: Static condition
  43.060.40 NIS ISO 4008-3 1987 Road vehicles-Fuel injection pump testing-part 3: Application and test procedures. Amendment 1
  43.040.10 NIS ISO 4009 2000 Commercial vehicles-Location of electrical and pneumatic connections between towing vehicles and trailers
  43.040.20 NIS ISO 4040 2009 Road vehicles-Location of hand controls, indicators and tell-tales in motor vehicles
  43.040.20 NIS ISO 4082 1981 Road vehicles-Motor vehicles-flasher units
  43.040.70 NIS ISO 4086 2001 Road vehicles-90 semi-trailer fifth wheel kingpin- Interchangeability
  43.040.10 NIS ISO 4091 2003 Road vehicles-Connectors for the electrical connection of towing and towed vehicles-Definitions, tests and requirement
  43.120 NIS ISO 4106 2004 Motorcycles - Engine test code - Net power
  13.240 NIS ISO 4126 2004 Safety devices for protection against excessive pressure
  01.080.20 NIS ISO 4129 1990 Mopeds-symbols for controls, indicators and tell-tales
  01.040.43 NIS ISO 4130 1978 Road vehicles-Three dimensional reference system and fiducial marks-Definitions
  43.100 NIS ISO 4131 1979 Dimensional codes for passengers cars
  43.040.20 NIS ISO 4148 2004 Road vehicles-Special warning lamps-Dimensions
  43.140 NIS ISO 4151 1987 Road vehicles-Mopeds-type, location and functions of controls
  NIS ISO 436 0 Destructive tests on welds in metallic materials -Transverse tensile test
  43.020 NIS ISO 4513 2010 Road vehicles-Visibility-Method for establishment of eyellipses for driver's eye location
  23.020.30 NIS ISO 4706 2008 Gas cylinders-Refillable welded steel cylinders -test pressure 60 bar and below
  83.060 NIS ISO 48 1994 Rubber vulcanized or thermoplastic -Determination of hardness (hardness between 101RHD and 1001RHD)
  NIS ISO 5171 2004 Pressure gauge used in welding ,cutting and allied processes
  43.120 NIS ISO 5422 1982 Road Vehicles - Anchorages for towing ropes, Cables or bars
  43.040.20 NIS ISO 5740 1982 Road Vehicle - Rear view mirrors test method for determining reflectance
  23.040.70 NIS ISO 5772 1998 Rubber hoses and hose assemblies for measured fuel dispensing-specification
  43.100 NIS ISO 5897 1998 Passenger cars - Rear-window system Test method demisting
  43.040.40 NIS ISO 611 2003 Road Vehicles - Braking of automotive vehicles and their trailers - Vocabulary
  01.040.43 NIS ISO 612 1978 Road Vehicles-Dimensions of motor vehicles and towed vehicle - Terms and definitions
  NIS ISO 61459 0 Gas analysis -preparation of calibration gas mixtures-Dynamic volumetric methods
  43.100 NIS ISO 6255 1997 Passenger cars - Rear window washing and wiping systems Test methods
  23.040.15 NIS ISO 6259-1 1997 Thermoplastics pipes-Determination of tensile properties-part 1: General test method
  23.040.15 NIS ISO 6259-3 1997 Thermoplastics pipes-Determination of tensile properties-part 3:Polyolefin pipes
  43.100 NIS ISO 6310 2009 Road Vehicles - Break linings Compressive strain test methods
  43.100 NIS ISO 6311 1980 Road Vehicles - Brake lining internal shear strength of lining material Test procedure
  43.040.40 NIS ISO 6312 2010 Road vehicles-Brake linings-Shear test procedure for disc brake pad and drum brake shoe assemblies
  43.040.40 NIS ISO 6313 1980 Road vehicles-Brake linings-effects of heat on dimensions and form of disc brake pads-test procedure
  43.040.40 NIS ISO 6314 1980 Road vehicles-Brake linings-Resistance to water, saline solution, oil and brake fluid-Test procedure
  43.040.40 NIS ISO 6315 1980 Road vehicles-Brake linings-Seizure to ferrous mating surface due to corrosion-Test procedure
  NIS ISO 6406 2005 Gas cylinders-Seamless steel gas cylinders-Periodic inspection and testing
  77.040.10 NIS ISO 6506-1 2005 Standard for brinell hardness for metallic material part 1: Test method
  77.040.10 NIS ISO 6506-2 2005 Standard for brinell hardness for metallic material part 2-Verification and calibration of testing machines
  77.040.10 NIS ISO 6506-3 2005 Standard for brinell hardness for metallic material part 3-calibration of reference blocks
  77.040.10 NIS ISO 6506-4 2005 Standard for brinell hardness for metallic material part 4-Table of hardness values
  77.040 NIS ISO 65062 0 Metallic materials -Hardness test-Brinell test
  77.040.10 NIS ISO 6508-1 1999 Metallic materials-Rockwell hardness test-part 2: Test method (scales A, B, C, D, E, F, G, H, K, N, T )
  43.100 NIS ISO 6518 1995 Road Vehicles - Ignition systems - Part 2: Electrical performance and function test methods
  43.020 NIS ISO 6546 2006 Road vehicles-Collection of accident data for evaluation of occupant restraint performance
  43.060.40 NIS ISO 6621-1 2003 Internal combustion engines-piston rings-part 1: Vocabulary
  43.060.10 NIS ISO 6621-2 2003 Internal combustion engines-piston rings-part 2: Inspection measuring principles
  43.060.10 NIS ISO 6621-4 2003 Internal combustion engines-piston rings part 4: General specification
  43.040.10 NIS ISO 6621-5 2005 Internal combustion engines-piston rings-part 3: Material specifications
  43.040.10 NIS ISO 66213-3 2000 Internal combustion engines-piston rings-part 3: Material specifications
  01.040.43 NIS ISO 6725 1981 Road vehicles-Dimensions of two -wheeled mopeds and motorcycles-Terms and definition
  01.040.43 NIS ISO 6726 1988 Mopeds and motorcycles with two wheels-masses- vocabulary
  21.040.10 NIS ISO 68-1 0 General purpose screw threads-Basic profile -part 1: Metric screw threads
  01.040.43 NIS ISO 6813 1998 Road vehicles-Collision classification-Terminology
  NIS ISO 6892 0 Metallic materials-Tensile testing-Method of testing at ambient temperature
  NIS ISO 6957 0 Copper alloys-Ammonia test for stress corrosion resistance
  NIS ISO 6964 0 Polyolefin pipes and fittings -Determination of carbon black content by calcinations and pyrolysis-Test method and basic specification corrosion resistance
  43.100 NIS ISO 6969 2004 Road Vehicles - Sound signaling devices Test after mounting on Vehicle
  43.040.70 NIS ISO 7141 2005 Road vehicles- light alloy wheels-impact test
  23.020.30 NIS ISO 7225 2005 Gas cylinders-Precautionary labels
  NIS ISO 7233 0 Rubber and plastics hoses and hose assemblies-Determination of suction resistance
  21.040.01 NIS ISO 724 0 General purpose metric screw threads-Basic dimension
  NIS ISO 7289 0 Quick-action couplings with shut-off valves for gas welding , cutting and allied processes
  NIS ISO 7291 1999 Gas welding equipment -Pressure regulators for manifold systems used in welding. Cutting and allied processes up to 300bar
  43.040.40 NIS ISO 7308 1987 Road vehicles-Petroleum-based brake fluid for stored-energy hydraulic brakes
  43.040.40 NIS ISO 7309 1985 Road vehicles-Hydraulic braking systems-ISO reference petroleum base fluid
  NIS ISO 7326 1991 Rubber and plastics hoses-Assessments of ozone resistance under static conditions
  77.040.10 NIS ISO 7500-1 1986 Metallic materials-verifications of static uniaxial testing machines-part 1:Tensile testing machine
  43.040.10 NIS ISO 7588 1998 Road vehicles-Electrical/electronic switching devices-part 1: Relays and devices
  43.040.10 NIS ISO 7588-3 1998 Road vehicles-Electrical/electronic switching devices-part 3: Microelays
  43.040.20 NIS ISO 7591 1982 Road vehicles-Retro-reflective registration plates for motor vehicles and trailers-specification
  43.040.40 NIS ISO 7629 1987 Road vehicles-Brake lining s-Disc brake pads-Evaluation of surface and material flaws after testing
  43.040.54 NIS ISO 7803 1987 Commercial road vehicles-Steering ball joints
  NIS ISO 7866 1999 Gas cylinders-Refillable seamless aluminium alloy gas cylinders-Design, construction and testing
  01.060 NIS ISO 80000-1 2009 Standard for quantity and units. Part 1-General
  01.060 NIS ISO 80000-10 2009 Standard for quantity and units. Part 10-Atomic and nuclear physics
  01.060 NIS ISO 80000-11 2008 Standard for quantity and units. Part 11-Characteristic numbers
  01.060 NIS ISO 80000-12 2009 Standard for quantity and units. Part 12-Solid state physics
  01.060 NIS ISO 80000-13 2009 Standard for quantity and units. Part 13-Information science and technology
  01.060 NIS ISO 80000-2 2009 Standard for quantity and units. Part 2-Mathematical signs and symbols to be used in the natural sciences and technology
  01.060 NIS ISO 80000-3 2006 Standard for quantity and units. Part 3-Space and time
  01.060 NIS ISO 80000-4 2006 Standard for quantity and units. Part 4-Mechanics
  01.060 NIS ISO 80000-5 2007 Standard for quantity and units. Part 5-Thermodynamics
  01.060 NIS ISO 80000-6 2008 Standard for quantity and units. Part 6-Electromagnetism
  01.060 NIS ISO 80000-7 2007 Standard for quantity and units. Part 6-Electromagnetism
  01.060 NIS ISO 80000-8 2007 Standard for quantity and units. Part 8-Acoustics
  01.060 NIS ISO 80000-9 2009 Standard for quantity and units. Part 9-Physical chemistry and molecular physics
  NIS ISO 8031 1993 Rubber and plastics hoses and hoses assemblies-Determination of electrical resistance
  NIS ISO 8033 1991 Rubber and plastics hose-Determination of adhesion between components
  43.180 NIS ISO 8093 1985 Diagnostic testing of electrical system
  97.200.50 NIS ISO 8124-1 2009 Safety of toys- Part 1: Safety Aspects related to mechanical and physical properties
  97.200.50 NIS ISO 8124-2 2009 Safety of toys- Part 2: Flammability
  97.200.50 NIS ISO 8124-3 2009 Safety of toys- Part 3: Migration of certain elements
  13.040.50 NIS ISO 8178-1 2006 Reciprocating internal combustion engines-Exhaust emission measurement-part 1:Test-bed measurement of gaseous and particulate exhaust emissions
  NIS ISO 8330 1998 Rubber and plastics hoses and hose assemblies-Vocabulary
  43.020 NIS ISO 8349 2002 Road Vehicles - Measurement of road surface friction
  43.140 NIS ISO 8644 2006 Motorcycles-Light-alloy wheels-Test method
  NIS ISO 9080 0 Plastics piping and ducting systems-Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
  NIS ISO 9090 0 Gas tightness of equipment for gas welding and allied processes
  19.040 NIS ISO 9227 1990 Corrosion test in artificial atmosphere-salt spray test
  43.100 NIS ISO 9258 1991 Passenger cars - Wiper systems - wiper blade length
  43.000 NIS ISO 9259 1991 Passenger cars - Windscreen wiper systems - Wiper arm to blade connection
  NIS ISO 9328-5 0 Steel plates and strips for pressure purposes-Technical delivery conditions-part 5: Austenitic steels
  NIS ISO 9328-7 2004 Steel plates and strips for pressure purposes-Technical delivery conditions-part 5: Austenitic steels
  25.160.01 NIS ISO 9606-1 1994 Qualification test of welders-Fusion welding-part 1:Steels
  25.160.01 NIS ISO 9606-2 2004 Qualification test of welders-Fusion welding-part 2: A luminium and aluminium alloys
  43.100 NIS ISO 9619 1992 Passenger cars - Windscreen wiping system - Test method
  21.040.01 NIS ISO 965-1 0 General purpose metric screw threads-Tolerance -part 1: Principles and basic data
  21.040.01 NIS ISO 965-2 0 General purpose metric screw threads-Tolerance -part 2: Limits of sizes for general purpose external and internal screw threads-Medium quality
  43.100 NIS ISO 9704 1990 Passenger cars - Wiper systems -Shaft ends and armholes
  23.020.30 NIS ISO 9809-1 1999 Gas cylinders-Refillable seamless steel gas cylinders- Design, construction and testing- part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 Mpa
  23.020.30 NIS ISO 9809-2 2000 Gas cylinders-Refillable seamless steel gas cylinders- Design, construction and testing- part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 Mpa
  23.020.30 NIS ISO 9809-3 0 Gas cylinders-Refillable seamless steel gas cylinders- Design, construction and testing- part 3: Normalized steel cylinder
  NIS ISO 9956-1 0 Specification and approval of welding procedures for metallic materials-part 1: General rules for fusion welding
  NIS ISO 9956-3 0 Specification and approval of welding procedures for metallic materials-part 3: Welding procedure test for arc welding of steel
  43.040.30 NIS ISO TR 9511 1991 Road vehicles-Driver hand -control reach-in vehicle checking procedure.
  17.060 NIS OIML D 10 0 Guideline for the determination of calibration interval of measuring instruments
  17.020 NIS OIML D 19 0 Pattern Evaluation and pattern approval
  17.020 NIS OIML D 2 0 Legal unit of measurement
  17.060 NIS OIML D 30 0 Guideline for application of ISO/IEC 17025 to the assessment of testing laboratories involve in legal metrology
  17.100 NIS OIML R 111-1 0 Weight of classes E1,E2, F1, F2, M1, M1-2, M2, M2-3 and M-3-part 1: Metrological and technical requirements
  17.100 NIS OIML R 111-2 0 Weight of classes E1,E2, F1, F2, M1-2, M2, M2-3 and M3 part 2:Test format
  17.020 NIS OIML R 60 0 Metrological regulation for load cells
  17.100 NIS OIML R 65 0 Force measuring system of uniaxial materials testing machine
  NIS OIML V 2-200 0 International vocabularies of metrology-basic and General concepts and associated terms (vim)
  17.220 NIS OIMLD 11 0 General requirements for electronic measuring instruments Measuring systems for gaseous fuel
  17.100 NIS OIMLD 28 0 Conventional value of the result of weighing in airRadar equipment for measurement of the speed of vehicles R 91
  17.220.99 NIS OIMLD 31 0 General requirements for software controlled measuring instruments
  17.060 NIS OIMLE 6 0 Guidance on the selection and implementation of performance requirement for utility meters containing additional functionality
  17.060 NIS OIMLG 13 0 Planning of metrology and testing laboratories
  17.060 NIS OIMLG 14 0 Density measurement
  17.060 NIS OIMLR 101 0 Indicating and recording pressure gauges, vacuum gauges and pressure-vacuum gauges with elastic sensing elements (ordinary instruments)
  17.140.50 NIS OIMLR 102 0 Sound calibrators
  17.060 NIS OIMLR 105 0 Direct mass flow measuring systems for quantities of liquids
  17.100 NIS OIMLR 107-1 0 Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers)-part 1: Metrological and technical requirements-test
  17.100 NIS OIMLR 107-2 0 Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers)-part 2:Test report format
  17.100 NIS OIMLR 109 0 Pressure gauges and vacuum gauges with elastic sensing elements (Standard instruments)
  17.100 NIS OIMLR 110 0 Pressure balances
  17.120 NIS OIMLR 112 0 High performance liquid chromatographs for measurement of pesticides and other toxic substances
  11.040.50 NIS OIMLR 114 0 Chemical electrical thermometers for continuous measurement
  11.040.50 NIS OIMLR 115 0 Chemical electrical thermometers with maximum device
  17.060 NIS OIMLR 117 0 Dynamic measuring systems for liquids other than water part 1: Metrological and technical requirements
  17.060 NIS OIMLR 118 0 Testing procedures and test report format for pattern evaluation of fuel dispensers for motor vehicles
  17.060 NIS OIMLR 119 0 Pipe provers for testing measuring systems for liquids other than water
  17.060 NIS OIMLR 120 0 Standard capacity measures for testing measuring systems for liquids other than water
  17.060 NIS OIMLR 125 0 Measuring systems for the mass of liquids in tanks
  17.20 NIS OIMLR 133 0 Liquid-in-glass thermometers
  11.100 NIS OIMLR 135 0 Spectrophotometers for medical laboratories
  17.100 NIS OIMLR 138 0 Vessels for commercial transaction
  17.200 NIS OIMLR 140 0 Measuring systems for gaseous fuel
  17.060 NIS OIMLR 15 0 Instruments for measuring the hectoliter mass of cereals
  17.020 NIS OIMLR 16-1 0 Non-invasive mechanical sphygmomanometers
  17.020 NIS OIMLR 16-2 0 Non-invasive automated sphygmomanometers
  17.100 NIS OIMLR 23 0 Tyre pressure gauges for motor vehicle
  17.060 NIS OIMLR 24 0 Standard one metre bar for verification officers
  11.040.55 NIS OIMLR 26 0 Medical syringes
  17.020 NIS OIMLR 34 0 Accuracy classes of measuring instruments
  17.020 NIS OIMLR 40 0 Standard graduated pipettes for verification officers
  17.020 NIS OIMLR 41 0 Standard burettes for verification officers
  17.060 NIS OIMLR 42 0 Meal stamps for verification officers
  17.020 NIS OIMLR 43 0 Standard graduated glass flasks for verification officers
  17.100 NIS OIMLR 47 0 Standard weights for testing of high capacity weighing machines
  91.140.60 NIS OIMLR 49-1 0 Water meters intended for the metering of cold potable water and hot water-part 1: Metrological and technical requirements
  91.140.60 NIS OIMLR 49-2 0 Water meters intended for the metering of cold potable water and hot water-part 2: Metrological and technical requirements
  91.140.60 NIS OIMLR 49-3 0 Water meters intended for the metering of cold potable water and hot water-part 3:Report format
  17.060 NIS OIMLR 50-1 0 Continuous totalizing automatic weighing instruments (belt weighers)- part 1:Metrological and test requirements-Tests
  17.060 NIS OIMLR 50-2 0 Continuous totalizing automatic weighing instruments (belt weighers)- part 2: Test report format
  17.100 NIS OIMLR 51-1 0 Automatic catch -weighing instruments- part 1: Metrological and technical requirements-tests
  17.100 NIS OIMLR 51-2 0 Automatic catch -weighing instruments- part 2:Test report format
  17.100 NIS OIMLR 52 0 Hexagonal weights-metrological and technical requirements
  17.100 NIS OIMLR 53 0 Metrological characteristics of estate sensing elements used for measurement of pressure determination methods
  NIS OIMLR 54 0 PH Scale for aqueous solutions
  17.140.01 NIS OIMLR 58 0 Sound level meters
  17.20 NIS OIMLR 61-1 0 Automatic gravimetric filling instruments- part 1 : metrological and technical requirements- test
  17.20 NIS OIMLR 61-2 0 Automatic gravimetric filling instruments- part 2 : Test report format
  17.040.50 NIS OIMLR 63 0 Petroleum measurement tables
  17.040.01 NIS OIMLR 66 0 Length measuring instrument
  17.060 NIS OIMLR 69 0 Glass capillary viscometers for the measurement of kinematic viscosity-verification method
  11.040.55 NIS OIMLR 7 0 Clinical thermometers (mercury -in-glass, with maximum device)
  17.060 NIS OIMLR 71 0 Fixed storage tanks-General requirement
  17.060 NIS OIMLR 76-1 0 Non- automatic weighing instruments part 1: Metrological and technical requirements-Test
  17.060 NIS OIMLR 76-2 0 Non- automatic weighing instruments part 2:Report format
  17.20 NIS OIMLR 79 0 Labeling requirements for pre-packaged products
  17.060 NIS OIMLR 80-1 0 Road and rail tankers with level gauging part 1: Metrological and technical requirements
  11.040.70 NIS OIMLR 84 0 Platinum, copper, and nickel resistance thermometers ( for industrial and commercial use)
  17.060 NIS OIMLR 85-1 0 Automatic level gauges for measuring the level of liquid in stationary storage tanks-part1: Metrological and technical requirements
  17.060 NIS OIMLR 85-2 0 Automatic level gauges for measuring the level of liquid in stationary storage tanks-part 2: Metrological control and tests
  17.060 NIS OIMLR 85-3 0 Automatic level gauges for measuring the level of liquid in stationary storage tanks-part 3: Repot format for type evaluation
  17.060 NIS OIMLR 87 0 Quantity of product in pre-packages
  17.140.01 NIS OIMLR 88 0 Integrating -averaging sound level meters
  17.060 NIS OIMLR 89 0 Electroencephalographs- metrological characteristics-methods and equipment for verification
  17.020 NIS OIMLR 90 0 Electroencephalographs- metrological characteristics-methods and equipment for verification
  17.080 NIS OIMLR 91 0 Radar equipment for measurement of the speed of vehicles R 91
  17.100 NIS OIMLR 97 0 Barometers
  17.020 NIS OIMLR 98 0 High precision line measures of lengths
  23.020.10 DNIS 610 2010 Specification for horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non- flammable water polluting
  77.140.20 DNIS 611 2010 Standard for unalloyed alluminium castings for remelting- Classification and composition
  01.040.21 DNIS 612 2010 Definition of terms of powered rotary and cylindrical mowers
  97.130.20 DNIS 613-1 2010 Standard for ice making machine Part 1; General requirements
  97.130.20 DNIS 613-2 2010 Standards for ice making machine Part 2:
  43.080.10 NIS 614 2017 Specification for trailers - open body Closed body and flat deck
  43.040.70 DNIS 625 2008 Standard for wheel barrow
  13.140.50 NIS 626 2010 Standard for road Vehicle exhaust emission
  97.200.40 DNIS 689-2 2007 Standard for playground equipment- part 2: Additional specific safety requirement and test methods for swings
  97.200.40 DNIS 689-3 2007 Standard for playground equipment- part 3: Additional specific safety requirement and test method for slides.
  97.200.40 DNIS 689-5 2007 Standard for playground equipment- part 5: Additional specific safety requirement and test method for carousels
  97.200.40 DNIS 689-6 2007 Standard for playground equipment- part 6: Additional specific safety requirement and test method for rocking equipments
  97.200.40 DNIS 689-7 2007 Standard for playground equipment- part 7: Guidelines on Installation, Inspection
  97.200.40 DNIS 689-8 2007 Standard for playground equipment- part 8: Impact absorbing playground surface- safety requirements and test methods
  43.150 DNIS 690 2007
  43.040.65 DNIS 700 2010 Automotive Vehicles- windscreen wiping system for 3 wheeler vehicles and vehicles treated as such.
  43.040.65 DNIS 701 2010 Automative vehicles-windscreen wiping and washing systems for MI category of vehicles
  43.040.99 DNIS 702 2010 Procedure for evaluation of Rubber bushing components
  43.040.99 DNIS 703 2010 Procedure for performance evaluation on Rubber to metal bonded components
  43.040.50 DNIS 704 2010 Automotive Vehicles- wheels rims for two and three wheeled vehicles- spoke wheel rims (method of test and requirements).
  43.100 DNIS 705 2010 Installation requirements of lighting and light signally devices for motor vehicle having more than three wheels, trailer and semi-trailer
  43.040.20 DNIS 706 2010 Auto lamp
  43.040.99 DNIS 707 2010 Procedure for performance evaluation on rubber to metal bonded component.
  43.040.080 DNIS 708 2010 Specification for automotive timing belts
  43.040.65 DNIS 709 2010 Automotive vehicle-Rea view mirrors specification
  43.040.65 DNIS 710 2010 Automotive Vehicles-Testing procedure for windscreen wiping system for 4 wheelers
  43.060.99 DNIS 711 2010 Classification and Test requirements for automotive Rubber Gaskets
  43.040.65 DNIS 713 2010 Specification for Electrical and screen wiper-wiper system
  93.080.20 DNIS 714 2010 Standard for Hot-mix Asphalt concrete for Highways and streets
  77.140.50 DNIS 715 2010 Specification for Hot Rolled patterned weldable floor steel plate for general engineering use
  DNIS 751 2013 Specification for vehicle security telematics
  43.040.01 NIS 775-1 2014 Maximum Road Speed Limiters for Motor Vehicles – Part 1: Installed Requirements
  43.040.01 NIS 775-2 2014 Standard for maximum road limiters for motor vehicles part 2: Specification for system and component requirement
  97.220.40 DNIS 776 2012 Specification for commercial divers training
  23.020.30 DNIS 784 2013 Standard on guidelines for the establishment of LPG cylinder refurbishing station
  23.020.30 DNIS 785 2013 Standard on transportable refillable welded steel cylinder for LPG-alternative design
  43.140 DNIS 882 2016 Standards for two-wheel motor cycle parking of side and centre stands
  43.141 DNIS 883 2016 Standard for motorcycle-light alloy wheel-test method
  43.140 DNIS 884 2016 Standard for motor cycle control, tyres, positions and functions
  43.141 DNIS 885 2016 Standard for motorcycle break and brake system, test and measurement method
  43.140 DNIS 886 2016 Motorcycle measurement method for determining maximum speed
  43.141 DNIS 887 0 Mopeds-Measurement methods for location of centre of gravity
  43.140 DNIS 888 2016 Three-wheeled mopeds and motorcycle masses vocabulary
  77.150.10 DNIS 890-1 2016 Wrought Aluminium and aluminium alloys alloyed-extruded rods/bars. Tubes and profiles-Part 1: Technical
  77.150.10 DNIS 890-2 2016 Wrought Aluminium and aluminium alloys alloyed-extruded rods/bars. Tubes and profiles-Part 2: Mechanical properties
  77.150.10 DNIS 890-3 2016 Wrought Aluminium and aluminium alloys extrude rods/bars, tubes and profiles-Part 3: Extruded rectangular bars-tolerance on shape and dimensions
  77.150.10 DNIS 891 2016 Aluminium and Aluminium Alloys-Alloyed ingots for remelting - Specification
  23.120 DNIS 892 2016 Industrial fans-specifications for balance quality and vibrations levels
  23.120 DNIS 893 2016 Industrial fans-methods of measurement of vibration
  43.140 DNIS 894 2016 Standard for motorcycle, types, positions and functions
  43.140 DNIS 895 2016 Standards for motorcycle-light alloy wheels-test method
  43.140 DNIS 896 2016 Standards for motorcycle break and break system
  43.140 DNIS 897 2016 Standard for two wheeled motorcycles parking stability of side centres stands
  67.250 DNIS 898 2016 Materials and articles in contact with food stuff-cutlery and table hollowware - requirements for cutlery for preparation of food
  67.250 DNIS 899 2016 Materials and articles in contact with food stuff-cutlery and table hollowware-lightly silvered platted table hollowware proteceted by lacquer
  43.060 DNIS 900 2016 Standard for ducted and air to heat pumps-testing and rating for performance
  93.080.30 DNCP 53 2015 Code of practice for installation of road vehicle speed limiting device
  77.150.10 DNCP 54 2015 Code of practice for for roofing with profile aluminium sheet
  25.160.20 DNCP 55 2015 Welded low-carbon steel for low pressure liquifiable gases - code of practice for inspection and reconditioning of used LPG
  23.120 DNCP 56 2015 Non - ducted air conditioners and heat pumps - testing and rating for performance. Code of practice for LPG cylinder management
  87.020 NIS 825 2017 Standard For Zinc-Rich Automobile Anti-Corrosive Coating
  23.100.10 NIS 944-1 2017 Air-Conditioners, Liquid chilling Packages and Heat pumps with electrically driven compressors for space heating and cooling part-1, Terms, Definition and classifications
  23.100.10 NIS 944-2 2017 Air-Conditioners, Liquid chilling Packages and Heat pumps with electrically driven compressors for space heating and cooling part-2, Test conditions
  23.100.10 NIS 944-3 2017 Air-Conditioners, Liquid chilling Packages and Heat pumps with electrically driven compressors for space heating and cooling part-3, Test Methods.
  23.100.10 NIS 944-4 2017 Air-Conditioners, Liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling part-4, Operating Requirements, Marking and Instructions.
  23.100.01 NIS ISO 5167-1 2003 Measurement of fluid flow by pressure differential devices inserted in circular cross-section conduits running full - Part 1: General Principles and Requirements
  23.100.01 NIS ISO 11 2013 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice Plates
  43.080.10 NIS ISO 362-1 2017 Measurement of noise emitted by accelerating road vehicles - Engineering Method Part 1: M and N categories
  . NIS ISO 362-2 2017 Measurement of noise emitted by accelerating road vehicles - Engineering Method Part 2: L category
  67.020 NIS ISO 363-3 2017 Measurement of noise emitted by accelerating road vehicles - Engineering Method: Part 3: Indoor testing M and N Categories
  67.260 NIS ISO 2416 2017 Passenger cars – Mass Distribution
  67.260 NIS ISO 3006 2017 Road Vehicles-Passenger car wheels for road use - Test Methods
  67.260 NIS ISO 3409 2017 Passenger cars – Lateral spacing of foot controls
  67.260 NIS ISO 3536 2017 Road Vehicles - Safety glazing materials - Vocabulary
  67.260 NIS ISO 10230 2017 Cycles-Splined hub and sprocket - Mating Dimensions
  67.260 NIS ISO 11243 2017 Cycles - Luggage Carriers for bicycles - Requirements and test methods
  67.260 NIS ISO 14878 2017 Cycles - Audible warning devices - Technical specifications and test methods
  25.040.30 DNIS 989 2017 Standard for yam pounding machine
  . DNIS 1017 2017 Table for comparison hardness seals