Add Selected to Cart

ALL CIVIL / BUILDING STANDARDS

ICS General Code Edition Title / Description
  91.100.40 NIS 586 2020 Standard for Prestressed and Reinforced Concrete Poles for Power Transmission and Distribution Lines
  NIS 444-1 2018 Cement - Part 1: Composition, Specifications and Conformity Criteria for Common Cements
  79.060.01 NIS 362 2020 Standard for Wooden Flush Door – Part 1
  NIS ARS 1301 2018 Guidelines for laying clay roofing tiles
  NIS ARS 1302 2018 Standard for burnt clay bricks - specification
  91.060.40 NIS 823 2019 - Methods of Testing Precast Concrete Pipe
  NIS ARS 1303 2018 Guidelines for laying clay bricks
  NIS ARS 1304 2018 Guideline for use on various type of cement.
  NIS ARS 1305 2018 Guidelines for rammed earth structure
  NIS 6444-1 2018 Cement-Part 1: Composition, Specifications and Conformity Criteria for common Cement.
  NIS ISO 1017 2018 Brown coals and lignites - Determination of acetone-soluble material (“resinous substance”) in the benzene-soluble extract
  NIS ISO 1018 2018 Hard coal - Determination of moisture-holding capacity
  NIS ISO 1170 2018 Coal and coke - Calculation of analyses to different bases
  NIS ISO 1213-1 2018 Solid Mineral fuels - Vocabulary - Part 1: Terms relating to coal preparation
  01.040.73 NIS ISO 1213-2 2018 Solid Mineral fuels - Vocabulary - Part 2: Terms relating to sampling, testing and analysis
  NIS ISO 13007-5 2018 Ceramic tiles – grout and adhesives part 5: Requirements, Test methods, evaluation of conformity, classification and designation of liquid applied waterproofing membranes for use beneath ceramics tiling bonded with adhesives
  NIS ISO 1893 2018 Refractory products – Determination of refractoriness under load –Differential method with rising temperature
  NIS ISO 1952 2018 Solid mineral fuels - Determination of extractable metals in dilute hydrochloric acid
  NIS ISO 2950 2018 Brown coals and lignites - Classification by types on the basis of total moisture content and tar yield
  NIS ISO 3880-1 2018 Building Construction – Stairs - Vocabulary
  NIS ISO 4463-2 2018 Measurement methods for Building – Setting out and measurement – Part 2 : Measurement stations and targets
  NIS ISO 4463-3 2018 Measurement methods for Building – Setting out and measurement – Part 3 : Checklists for the procurement of surveys and measurement services
  NIS ISO 5068-1 2018 Brown coals and lignites - Determination of moisture content - Part 1: Indirect gravimetric method for total moisture.
  NIS ISO 5068-2 2018 Brown coals and lignites - Determination of moisture content - Part 2: Indirect gravimetric method for moisture in the analysis sample.
  NIS ISO 5069-1 2018 Brown coals and lignites - Principles of sampling - Part 1: Sampling for determination of moisture content and for general analysis
  NIS ISO 5069-2 2018 Brown coals and lignites - Principles of sampling - Part 2: Sample preparation for determination of moisture content and for general analysis
  NIS ISO 5071-1 2018 Brown coals and lignites - Determination of the volatile matter in the analysis sample -- Part 1: Two-furnace method
  NIS ISO 5072 2018 Brown coals and lignites - Determination of true relative density and apparent relative density
  NIS ISO 647 2018 Brown coals and lignites - Determination of the yields of tar, water, gas and coke residue by low temperature distillation
  NIS ISO 6602 2018 Coal - Determination of mineral matter
  NIS ISO 7077 2018 Measurement methods for Building – General principles and procedures for the verification of dimensional compliance
  NIS ISO 7078 2018 Building construction – Procedure for setting out, measurement and surveying – Vocabulary and guidance notes
  NIS ISO 975 2018 Brown coals and lignites - Determination of yield of benzene-soluble extract - Semi-automatic method
  NIS ISO 9882 2018 Performance Standards In Building - Performance Test For Precast Concrete Floors - Behaviour Under Non-Concentrated Load
  NIS ISO 9883 2018 Performance Standards In Building - Performance Test For Precast Concrete Floors - Behaviour Under Concentrated Load
  NIS 1078 2019 Standard for Wood-Cased Graphite and Coloured Pencil – New Standard
  97.140 NIS 1099 2019 Specification For Upholstery Chairs (Sofa)
  91.140.70 NIS 1098 2019 Standard for Vitreous Sanitary Ware
  97.140 NIS 1097 2019 Standard for Furniture (Rattan and Bamboo)
  91.060.50 NIS 1132 2020 Standard for Panel Door
  79.080 NIS 1187 2019 Standard for Flat and Round Wood Toothpick
  NIS 1182 2021 Methods of Measurement of Civil Engineering and Building Works(Earth Works)
  NIS 1183 2021 Standards for Off-Street Car Parking Facilities
  NIS 649 2021 Specification for Polished Granite Dimension Stone
  NIS 650 2021 Specification for Polished Marble Dimension stone
  NIS ISO 3160-1 2021 Watch-cases and accessories — Gold alloy coverings — Part 1: General requirements
  NIS ISO 3160-2 2021 Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness and adhesion
  NIS ISO 3497 2021 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
  NIS ISO 8654 2021 Jewellery — Colours of gold alloys — Definition, range of colours and designation
  NIS ISO 9202 2021 Jewellery and precious metals — Fineness of precious metal alloys
  NIS ISO 11426 2021 Determination of gold in gold jewellery alloys-Cupellation method (fire assay)
  NIS ISO 17034 2021 General requirements for the competence of reference material producers
  NIS ISO 27874 2021 Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods
  NIS ISO 15093 2021 Jewellery and Precious Metals – Determination of High Purity Gold, Platinum and Palladium – Difference Method Using ICP-OES
  NIS ISO 15721 2021 Metallic Coatings – Porosity Tests – Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour
  NIS ISO 19426-2 2021 Structures for mines shafts- Part 2: Headframe structures
  NIS ISO 19426-3 2021 Structures for mines shafts- Part 3: Sinking stages
  NIS ISO 19426-4 2021 Structures for mines shafts- Part 4: Conveyances
  NIS ISO 19426-5 2021 Structures for mines shafts- Part 5: Shaft system structures
  NIS ISO 19426-1 2021 Structures for mines shafts- Part 1: Vocabulary
  NIS ISO 19434 2021 Mining-Classification of mine accidents
  NIS ISO 20305 2021 Mine closure and reclamation-Vocabulary
  NIS ISO 22932-2 2021 Mining-Vocabulary-Part 2: Geology
  NIS ISO 22932-1 2021 Mining-Vocabulary-Part 1: Planning and surveying
  NIS ISO 24018 2021 Jewellery and precious metals-Specifications for 1kilogram gold bar
  91.100.10 NIS 446 2003 Methods of testing cement- Determination of strength
  55.160 NIS 258 1989 Standard for plastic crates to hold soft drinks and beer glass bottles (Withdrawn See 954)
  91.100.15 NIS 587 2007 Standard for Sandcrete blocks- Part 1 Non load bearing (withdrawn see NIS 978:2017)
  91.100.15 NIS 584 2007 Methods of testing sand-Crete blocks (withdrawn see NIS 978;2017)
  91.100.20 NIS 87 2004 Specification for sandcrete blocks (withdrawn see NIS 978)
  13.060 NCP 081 2018 Code of practice for dam Reservoir operation in Nigeria
  93.020 NIS 693 2007 Standard for Stabilised Earth Bricks
  91.100.23 NIS ISO 13007-1 2018 Ceramic tiles – grout and adhesives part 1: Terms, definitions and specifications for adhesives
  91.100.23 NIS ISO 13007-2 2018 Ceramic tiles – grout and adhesives part 2: Test Methods for adhesives
  91.100.23 NIS ISO 13007-3 2018 Ceramic tiles – grout and adhesives part 3: Terms, definitions and specifications for Grouts
  91.100.23 NIS ISO 13007-4 2018 Ceramic tiles – grout and adhesives part 4: Test methods for grout
  73.040.00 NIS ISO 1953 2018 Hard coal - Size analysis by sieving
  97.40 NIS ISO 21015 2019 Office Furniture – Office Work Chairs – Test Methods for the Determination of Stability, Strength and Durability
  97.140 NIS ISO 21016 2019 Office Furniture – Tables and Desks – Test Methods for the Determination of Stability, Strength and Durability
  97.140 NIS ISO 24496 2019 Office Furniture – Office Chairs – Methods for the Determination of Dimensions
  73.040 NIS ISO 1018 2019 Hard coal - Determination of moisture-holding capacity
  73.040 NIS ISO 1170 2020 Coal and coke - Calculation of analyses to different bases
  83.080.01 NIS ISO 602 2018 Coal - Determination of mineral matter
  29.240.99 NIS 06 1972 Specification for wood poles for power over headline
  91.080.40 NIS 12 1974 Methods of testing concrete
  91.100.30 NIS 13 1974 Specification for aggregates from natural sources for concrete
  91.100.20 NIS 14 1974 Methods for the sampling and the testing of minerals aggregate, sand and filter
  91.100.10 NIS 15 1974 Portland blasts furnace cement.
  81.100.20 NIS 17 1974 Schedule of unit weight of building blocks
  91.100.20 NIS 18 1974 Specification for clay bricks and blocks
  91.100.40 NIS 19 1974 Specification for bending dimensions and scheduling of bars for the reinforcement of concrete
  97.150 NIS 23 1973 Specification for flexible PVC flooring
  91.120.01 NIS 30 1973 Fire tests on building materials and structures.
  91.100.20 NIS 35 1974 Specification for PVC vinyl asbestos floor tiles
  91.100.20 NIS 74 1975 Specification for burnt clay building units
  01.040.91 NIS 78 1978 Specification for the use of metric units in construction industry
  83.100 NIS 94 1978 Method of measuring compression of flexible cellular
  91.080.10 NIS 96 1980 Nigerian standards specification for high tensile alloy steel bars cold worked for prestressed concrete
  83.100 NIS 98 1978 Method of measuring apparent density of flexible cellular materials
  77.140.60 NIS 117 2004 Specification for Steel Bars for the Reinforcement of Concrete
  71.100.40 NIS 143 1981 Method for test for water resistance (Static head penetration test)
  83.100 NIS 152 1989 Method of test for flexible cellular materials
  91.080.40 NIS 156 1982 Standard method of testing fresh concrete
  91.080.10 NIS 157 1982 Specification for bedding dimension of chump of concrete of both in the laboratory and in the field
  91.080.10 NIS 158 1982 Air-cooled blast furnace slag coarse aggregate to concrete
  93.080.10 NIS 171 1983 Specification for bitumen for road purposes
  75.140 NIS 211 1985 Specification for bitumen road emulsion (Anionic and Cationic)
  55.160 NIS 258 1989 Standard for plastic crates to hold soft drinks and beer glass bottles
  91.100.20 NIS 262 1989 Standard on asbestos cement products corrugated sheet and fittings for roofing and cladding.
  91.140.70 NIS 304 2004 Standard for china wash down WC pans with horizontal outlet
  11.100.20 NIS 363 1997 Standard for asbestos cement flat sheets
  23.040.50 NIS 364 1997 Standard for asbestos cement pressure pipes (part 1)
  79.060.01 NIS 365 1997 Standard for Wooden Flush Doors (Part 2)
  91.100.10 NIS 366 1997 Standard for fibre reinforced roofing sheets
  91.100.10 NIS 367 2004 Standard test methods for the characteristics of cement (part 1-Test for Physical Properties)
  91.100.10 NIS 368-2 1997 Standard test methods for the characteristics of cement (Part 2-Test for chemical properties). (See NIS 445:2003)
  91.100.25 NIS 369 1997 Standard for stabilized earth bricks (See NIS 693:2007)
  91.100.25 NIS 427 2000 Standard for ceramic tiles
  91.100.10 NIS 444-2 2003 Cement:-Pt 2: Conformity evaluation
  91.100.10 NIS 445 2003 Methods of testing cement-Chemical analysis of cement (See NIS 368-2:1997)
  91.100.10 NIS 447 2003 Methods of testing cement-Determination of setting time and soundness
  91.100.10 NIS 448 2003 Methods of testing cement-Determination of fineness
  91.100.10 NIS 449 2003 Methods of testing cement-Determination of chloride, carbon dioxide and alkaline content of cement
  91.100.10 NIS 450 2003 Standard for pre-cast concrete paving blocks
  91.100.10 NIS 451-1 2003 Standard for pavements constructing with concrete paving blocks. Pt 1: Guide for the structural design of lightly trafficked pavement.
  91.100.10 NIS 452 2003 Methods of testing fly ash-Determination of calcium oxide content
  91.100.10 NIS 453 2003 Methods of testing cement-Pozzolanity test for Pozzolanic cement
  91.100.10 NIS 454 2003 Test for geometric properties of aggregate- Assessment of fineness- Methylene blue test
  91.100.10 NIS 455 2003 Methods of testing cement-Taking or preparing samples of cement
  79.060.20 NIS 482 2004 Standard for particleboards
  79.060.10 NIS 483 2004 Standard for ordinary plywood
  97.040.10 NIS 496 2004 Standard for kitchen cabinets and filaments
  67.250 NIS 501 2004 Standard for sand filter media
  75.140 NIS 523 2006 Standard for penetration grade and cutback bitumen
  75.140 NIS 524 2006 Specification for bitumen mixture.
  75.140 NIS 525 2006 Specification for bitumen for industrial purposes
  75.140 NIS 526 2006 Specification for bitumen road emulsion (Anionic and cationic
  79.040 NIS 527 2006 Standard for sawn timber for building construction
  79.040 NIS 528 2006 Standard for laminated timber for furniture
  91.100.25 NIS 552 2006 Concrete roofing tiles and fittings for roof covering and wall Cladding- Test method
  91.100.25 NIS 553 2017 Concrete roofing tiles and fittings for roof covering and wall Cladding- Product specification
  91.100.10 NIS 583 2007 Specification for standard sand for Mortar prism strength test of cement
  91.100.30 NIS 585 2007 Standard for concrete admixtures- Part 1 specification for accelerating Admixtures, retarding admixtures and water reducing admixtures
  91.100.30 NIS 588 2007 Testing hardened concrete- Part 1: Method for determination of the Compressive strength of concrete cores
  91.100.30 NIS 589 2007 Testing hardened concrete- Part 2: method for determination of density
  91.100.15 DNIS 648 2010 (Standard) method of test for polished dimension stones
  91.100.15 DNIS 649 2010 Standard for polished gramite dimension stones
  91.100.15 DNIS 650 2010 Standard for polished marble dimension stones
  93.020 NIS 692-1 2007 Standard for Compressed earth block- part 1: Terminology
  93.020 NIS 692-10 2007 Standard for Compressed earth block- part 10: Technical specification forfacing compressed earth block masonry
  93.020 NIS 692-11 2007 Standard for Compressed earth block- part 11: Classification of materials, identification and mechanical tests.
  93.020 NIS 692-2 2007 Standard for Compressed earth block- part 2: Definition, classification and designation.
  93.020 NIS 692-3 2007 Standard for Compressed earth block- part 3: Definition, classification and designation of earth mortar
  93.020 NIS 692-4 2007 Standard for Compressed earth block- part 4: Definition, classification and designation of compressed earth block masonry
  93.020 NIS 692-5 2007 Standard for Compressed earth block- part 5: Technical specification for ordinary compressed earth block
  93.020 NIS 692-6 2007 Standard for Compressed earth block- part 6: Technical specification for facing earth blocks
  93.020 NIS 692-7 2007 Standard for Compressed earth block- part 7: Technical specification for ordinary earth mortar
  93.020 NIS 692-8 2007 Standard for Compressed earth block- part 8: Technical specification for facing earth mortars
  93.020 NIS 692-9 2007 Standard for Compressed earth block- part 9: Technical specification for ordinary compressed earth blocks
  91.100.30 DNIS 694 2007 Standard for Precast concrete for Kerbs, chennels, edgings and quadrants
  97.040.10 DNIS 695 2007 Standard for Kitchen Furniture and Fittings
  NIS 724 2010 Standard for Terrazzo Tiles
  NIS 725 2010 Standard for Wood Based structural Panels
  45.080 NIS 726 2010 Standard for Railway Track components and joints
  01.040.45 NIS 727 2010 Standard for Glossary of terms for modern Railways
  79.060 NIS 728 2010 Standard of Test method for wood based structural panels
  91.100.0 NCP 01 1973 The structural use of concrete in building
  91.100.30 NCP 02 1973 The use of timber for construction
  91.100.30 NCP 03 1973 Loading
  93.020 NCP 030-1 2007 Code of practice for compressed earth block-part 1:production Of earth mortars
  93.020 NCP 030-2 2007 Code of practice for compressed earth block-part 2:production Of compressed earth blocks.
  93.020 NCP 030-3 2007 Code of practice for compressed earth block-part 3: the assembly Of compressed earth earth blocks masonry
  91.100.30 NCP 04 1973
  91.100.30 NCP 05 1973
  91.100.30 NCP 06 1973
  75.140 NCP 19 2006 Code of practice for the use of bitumen road emulsion
  79.040 NCP 20 2006 Code of practice for structural use of timber
  45.080 NCP 033 2010 Code of practice for railway clearance
  43.080.10 NCP 40 2008 Code of Practice for Heavy Duty Vehicle Drivers
  91.100.25 NIS BE EN 491 2004 Concrete roofing tiles and fittings for roof covering and wall cladding- Test methods.
  91.100.25 NIS BS EN 409 2004 Concrete roofing tiles and fittings for roof covering and wall cladding- Products specification.
  91.100.25 NIS BS EN 490 2004 Concrete roofing tiles and fittings for roof covering and wall cladding- Products specification.
  91.100.25 NIS BS EN 7263-1 2012 Standard for precast concrete kerbs, channels, edgings, flags and quadrants
  NIS ISO 13477 0 Thermoplastic pipes for the conveyance of fluids-Determination of resistance to rapid crack propagation (RCP)-Small scale steady state test (S4 test)
  NIS ISO 13478 1997 Thermoplastic pipes for the conveyance of fluids-Determination of resistance to rapid crack propagation (RCP)-Full scale test (FST)
  NIS ISO 13479 1997 Polyolefin pipes for the conveyance of fluids-Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes (notch test)
  91.100.30 NIS ISO 2265-2 2012 Part 2 specification of concrete and compliance of concrete
  91.100.30 NIS ISO 22965-1 2012 Standard for concrete -part 1-Method of specifying and Guidance for specification
  91.100.25 NIS ISO 390 1993 Products in fiber-reinforced cement products long corrugated or asymmetrical section sheet and fitting for roofing and cladding
  01.040.93 NIS ISO 6707-1 2012 Standard for building and civil engineering vocabulary
  91.100.40 NIS ISO 8336-1 1993 Fibre-cement flat sheet
  91.100.40 NIS ISO 8336-2 1993 Fibre-cement fascia board
  91.100.30 NIS 16 1974 Air-cooled blast furnace slag coarse aggregate for concrete (Withdrawn, See NIS 158:1982)
  55.100 NIS 165 1982 Standard for soft drink and beer glass bottles (Withdrawn, See NIS 381:1997)
  91.100.10 NIS 439 2000 Standard for cement (Withdrawn)
  91.100.10 NCP 11 2003 Code of practice for cement secondary packaging (Withdrawn See NCP 10:2003)
  91.1000.30 DNCP 046 2013 Code of practice for ready mixed concrete
  93.020 DNIS 692-1 2007 Standard for Compressed earth block- part 1: Terminology
  93.020 DNIS 692-2 2007 Standard for Compressed earth block- part 2: Definition, classification and designation.
  93.020 DNIS 692-3 2007 Standard for Compressed earth block- part 3: Definition, classification and designation of earth mortar
  93.020 DNIS 692-4 2007 Standard for Compressed earth block- part 4: Definition, classification and designation of compressed earth block masonry
  93.020 DNIS 692-5 2007 Standard for Compressed earth block- part 5: Technical specification for ordinary compressed earth block
  93.020 DNIS 692-6 2007 Standard for Compressed earth block- part 6: Technical specification for facing earth blocks
  93.020 DNIS 692-9 2007 Standard for Compressed earth block- part 9: Technical specification for ordinary compressed earth blocks
  45.080 DNIS 726 2010 Standard for Railway Track components and joints
  01.040.45 DNIS 727 2010 Standard for Glossary of terms for modern Railways
  93.080.20 DNIS 745 2012 Standard for production of hot mixed asphaltic concrete for high ways and streets
  91.100.30 DNIS 793 2014 Standard for admixtures for concrete, mortar and grout
  91.100.10 DNIS 794 2014 Specifications and method of test for pigments for coloring of building materials based on cement and/or lime
  93.020 DNIS 692-10 2007 Standard for compresed earth block-part 10: Technical specification for facing compressed earth block masonry
  93.020 DNIS 692-11 2007 Standard for compressed earth blocks-part 11. classification of materials, identifiction test and mechanical tests.
  73.060 DNIS 824 2015 Standard for rock classification
  01.080.30 NIS ISO 710-1 2017 Graphical symbols for use on detailed map plans and goelogical crossections part-1 General rules of representation
  01.080.30 NIS ISO 710-2 2015 Graphical symbols for use on detailed maps plans and geological cross-sections part-2 Representation of sedimentary rocks
  01.080.30 NIS ISO 710-3 2015 Graphical symbols for use on detailed plans and geological cross-sections part-3 Representation of magnetic rocks
  01.080.30 NIS ISO 710-4 2015 Graphical symbols for use on detailed maps plan and geological cross-section part-4
  01.080.30 NIS ISO 710-5 2015 Graphical symbols for use on detailed maps and geological cross-section part-5 Representation of minerals
  97.040.20 DNIS 826 2015 Specification for tables
  81.080 DNIS 827 2015 Terminologies for refractory
  93.020 DNIS 828 2015 Standard for method of measurement of building and civil engineering works
  91.100.10 DNIS 829 2015 Specification for gypsum building plaster
  91.100.30 DNIS 831 2015 GLossary of terms for concrete
  91.100.30 DNIS 832-1 2015 Conrete test method part - 1 method of sampling fresh concrete on site
  91.100.30 DNIS 832-2 2015 Conrete test method part - 2 method for mixing and sampling fresh concrete in the laboratory
  91.100.30 DNIS 832-3 2015 Conrete test method part - 3 method for making test cubes from fresh concrete
  91.100.30 DNIS 832-4 2015 Conrete test method part - 4 method of normal curing of test specimens (20 deg. C method)
  91.100.30 DNIS 832-5 2015 Conrete test method part - 5 method of accelerated curing of test cubes
  91.100.30 DNIS 832-6 2015 Conrete test method part - 6 method for determination of slump
  91.100.30 DNIS 832-7 2015 Conrete test method part - 7 method for determination of campacting factor
  91.100.30 DNIS 832-8 2015 Conrete test method part - 8 method for determination of compressive strength of concrete cubes
  . DNIS 838-1 2015 Nigerian green building standard part-1
  . DNIS 838-2 2015 Glossary of terms for Nigerian green building standard part-2
  . DNIS 956 2016 Standard for white portland cement
  91.100.15 NIS 978 2017 Standard for sandcrete block
  91.100.30 DNCP 46 2013 Code of practice for ready made concrete
  65.150 DNCP 49 2015 Code of practice for the design, construction, maintenance of aquatic facility
  91.100.40 DNCP 50 2015 Code of practice for pre-stressed concrete
  91.140.60 DNCP 51 2015 Code of practice for water supply in building
  91.140.80 DNCP 52 2015 Code of practice for building drainage
  91.100.25 NIS 938 2017 Plaster of Paris (POP)
  75.140 NCP 62 2017 Code of Practice for Damp Proofing of Roofs with Bitumen Felts
  75.140 NCP 63 2017 Code of Practice for Water Proofing of Roofs with Bitumen Felts
  91.100.30 NIS ISO 22965-1 2017 Concrete – Part 1: Methods of Specifying and Guidance for The Specifier
  91.100 NIS ISO 10845-1 2010 Construction Procurement – Part 1: Processes, Methods, and Procedures
  91.100 NIS ISO 10845-2 2017 Construction Procurement – Part 2: Formatting and Compilation of Procurement Documentation
  91.100 NIS ISO 10845-3 2017 Construction Procurement – Part 3: Standard Conditions of Tender
  91.100 NIS ISO 10845-4 2017 Construction Procurement – Part 4: Standard Conditions for the Calling for Expressions of Interest
  91.100 NIS ISO 10845-5 2017 Construction Procurement – Part 5: Participation of Targeted Enterprises in Contracts
  91.100 NIS ISO 10845-6 2017 Construction Procurement – Part 6: Participation of Targeted Partners in Joint Ventures in Contracts
  91.100 NIS ISO 10845-7 2017 Construction Procurement – Part 7: Participation of Local Enterprises and Labour in Contracts
  91.100 NIS ISO 10845-8 2017 Construction Procurement – Part 8: Participation of Targeted Labour in Contracts
  91.100.30 NIS ISO 1920-1 2017 Testing of Concrete – Part 1: Sampling of Fresh Concrete
  91.100.30 NIS ISO 1920-2 2017 Testing of Concrete – Part 2: Properties of Fresh Concrete
  91.100.30 NIS ISO 1920-3 2017 Testing of Concrete – Part 3: Making and Curing Test Specimens
  91.100.30 NIS ISO 1920-4 2017 Testing of Concrete – Part 4: Strength of Hardened Concrete
  91.100.30 NIS ISO 19210-5 2017 Testing of Concrete – Part 5: Properties of Hardened Concrete Other Than Strength
  91.100.30 NIS ISO 1920-6 2017 Testing of Concrete – Part 6: Sampling, Preparing and Testing of Concrete Cores
  91.100.30 NIS ISO 1920-7 2017 Testing of Concrete – Part 7: Non-destructive Tests on Hardened Concrete
  91.100.30 NIS ISO 1920-8 2017 Testing of Concrete – Part 8: Determination of Drying Shrinkage of Concrete for Samples Prepared in the Field or in the Laboratory
  91.100.30 NIS ISO 1920-9 2017 Testing of Concrete – Part 8: Determination of Creep of Concrete Cylinders in Compression